Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Vibration Analysis Of Flexible Beam Using Electromagnetic Transducer

A Novel Vibration Velocity Measurement Method for Electromagnetic Vibrators

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Vibration Analysis for Flexible Beam Structures with Cantilever-Hertzian Contact Boundary Conditions

Application of a shunt damping circuit in a structure with an electromagnetically coupled beam: free vibration and frequency response

A new electromagnetic shunt damping treatment and vibration control of beam structures

Active Vibration Control of Beam Using Electro-magnetic Constrained Layer Damping

Effects of magnetic field distribution on micro-vibration response of magneto-rheological visco-elastomer based sandwich beam

Semi-analytical analysis on free vibration of cantilever beam with particle damping based on multiscale method

Studies on a Passive Electromagnetic Damper

Simulation and Experimental Research on Flexible Structure Vibration Control Based on Electromagnetic Actuator

Bending and Vibration Analysis of Flexoelectric Beam Structure on Linear Elastic Substrates

Vibration Control via Electromagnetic Shunt Damping

An analysis of variable magnetic damping of a cantilever beam-plate with end coils in transverse magnetic fields

Multiflexoelectric Actuation and Control of Beams

Stochastic Microvibration Response Analysis of a Magnetorheological Viscoelastomer Based Sandwich Beam under Localized Magnetic Fields

MICRO-VIBRATION SUPPRESSION OF EQUIPMENT SUPPORTED ON A SANDWICH BEAM INCORPORATING MAGNETO-RHEOLOGICAL ELASTOMER (MRE) CORE

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Damper Based On Electromagnetic Shunt Damping Method

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation