Abstract:In practical engineering, whilst estimating the jacking force of rectangular pipe jacking using an empirical formula, the results obtained from said formula deviate from reality and manifest inadequate engineering guidance. The equations governing the applied force during the installation of rectangular pipe jacking have been derived for various contact states involving the interaction between the pipe, slurry, and soil. The distinct stress conditions in the pipe jacking process as well as the shear-friction mechanism between the pipe and the surrounding soil have been taken into account. The displacement control method is introduced to simulate the pipe–slurry–soil contact friction during the pipe jacking process in FLAC 3D . Additionally, the pipe jacking behavior, pipe–slurry–soil contact frictional force, and variation law of the jacking force are also simulated. Mutual verification was carried out using the results obtained from field monitoring, numerical and theoretical. The findings are as follows: the established equations for calculating pipe jacking force are highly applicable across various conditions of pipe–slurry–soil contact, and the outcomes derived from theoretical formulas align remarkably well with those obtained through field monitoring and numerical simulation. During the jacking process, the sidewalls exhibit initial partial sliding followed by a complete movement as the jacking force intensifies and subsequently diminishes, eventually attaining stability during the behavior adjustment phase. Moreover, the bottom pipe–soil contact is the most common situation in actual construction.

Influence Of Overcut Length On Jack Force And Acting Earth Pressure During Pipe Jacking

Environmental Effects Caused by Construction of Rectangular Jacking Pipes with Large Section, Small Space and Shallow Overburden

Influence of the Advance Jacked Pipe on the Jacking Force of the Subsequent Pipe Based on Pipe–Soil Full Contact Model

Site-based Experimental Study on Pipe Behavior During Pipe Jacking

Analysis of influence of pipe jacking construction on adjacent piles

Prediction of Surface Subsidence Caused by Rectangular Pipe Jacking Construction

Group Effect of Pipe Jacking in Silty Sand

Study on Soil-Compacting Effects Induced by Pipe Jacking Construction

In-situ Test Research on Influence of Pipe Jacking on Soil

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

TESTING STUDY AND ANALYSIS ON SOIL DISTURBANCE INDUCED BY PIPE JACKING CONSTRUCTION

The Theoretical Analysis of Calculation for Jacking Forces in Pipe-Jacking Under the Condition of Mudstone

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

Frictional resistance calculation and jacking force prediction of rectangular pipe jacking

Analysis on Performance of Large Diameter Concrete Jacking Pipe

Study on Calculational Method of Ground Settlement Induced by Level Parallel Pipe Jacking

Analysis of the influence of geometrical parameters of circular steel pipe with flange plate on the jacking force

Squeezing Effects of Jacked Pile Considering Static Pile Press Machine's Action

Influence of Prebored Hole Measures on Compacting Effects of Jacked Piles

Numerical Simulation and Factor Analysis of Jacked Pile Compacting Effects

Analysis of Superimposed Load Induced by Propulsion of Adjacent Level Parallel Pipe-Jacking