Theoretical-Analysis for Configurations of Stereoregular Isotactic Polypropylene Chains

JM XU,ZP ZHOU,XB SONG

1990-01-01

Chinese Science Bulletin

Abstract:Ⅰ. INTRODUCTIONBy X-ray diffraction experiment, we know that the isotactic polypropylene crystal manifests a peroid of 6.50 Because the ratio of the distance 6.50 to 2.35, which is the period of the methyls in their planar arrangement, is not an integer, the methyls are deduced

What problem does this paper attempt to address?

A Study of Molecular Orientation of Polymethylene Chains

LX Zhang,YX Huang,DL Zhao

DOI: https://doi.org/10.3321/j.issn:0251-0790.2002.03.045

2002-01-01

Abstract:In this paper, molecular orientation behavior of polymethylene chains was investigated on the basis of considering long-distance interactions by using the enumeration calculation method and the rotational isomeric state (RIS) model. The chain lengths are from N = 12 to N = 24, and the Lennord-Jennes potential was adopted in the non-local interaction calculations. The molecular orientation function(Legendre polynomial) may be well expressed as/(lambda(2) - lambda(-1)) a = (lambda(2) - lambda(-1)) + bhere a and b only depend on the chain length, and decrease with the increase of chain length, especially for b. In the meantime, we also calculate the Helmholtz free energy change in the process of tensile deformation. Comparisons with Gaussian chains are made, and our results are close to those obtained from the Roe and Krigbaum theory.
Average bond conformations of polymer chains

Zhang Linxi,Xia Agen,Xu Jianmin,Zhao Delu

DOI: https://doi.org/10.1016/S0014-3057(99)00108-1

IF: 6

2000-01-01

European Polymer Journal

Abstract:In this paper, the average bond conformations of polypropylene chains in the second-order interaction approximation, and of isotactic polypropyleneoxide chains in the third-order interaction approximation are investigated. We calculate the a priori probabilities using numerical value calculation method. The average bond conformations may be used as a tool to assess the energies of various rotational isomeric stages, especially for chains that have poorly defined rotational isomers.
Configuration-Dependent Properties Of Poly(Dimethylsiloxane) Chain

Linxi Zhang,Agen Xia,Xianghong Wang,Jianming Xu,章林溪

1999-01-01

Chinese Journal of Polymer Science

Abstract:The intermolecular rotational potential energies for poly(dimethylsiloxane) (PDMS) chains are directly obtained from a priori probability P-alpha beta. Here the differing statistical weight matrices for the Si-O and O-Si bonds are considered in calculating the configuration partition function. In the Bahar's model, as the same statistical weight matrices for the Si-O and O-Si bonds are adopted, there exists a large deviation of a priori probability P-alpha beta between the theory and the molecular dynamics (MD) simulation. Our model gives satisfactory agreement with experiment on the mean-square unperturbed end-to-end distance, the mean-square dipole moment and its temperature dependence, and the molar cyclization equilibrium constants for dimethylsiloxane oligomers. This new rotational isomeric state approach can be widely applied to other chains; such as -CH2-C[(CH2)(m)H](2)- and -O-Si[(CH2)(m)H](2) for arbitrary m.
Structural Ensemble of Molecular Chains in Isotactic Polypropylene under Cylindrical Confinement

Ziwei Lai,Nan Zheng,Ziying Liang,Yuanjie Wang,Hui Niu,Ming-Sheng Ji,Bo Ni,Xiang Huang,Xing Ouyang,Xiaoguang Li,Bernard Lotz,Yan Cao

DOI: https://doi.org/10.1021/acs.macromol.0c02357

IF: 5.5

2021-01-01

Macromolecules

Abstract:epitaxial Helical chain assembly has a great influence on the physical properties of polymeric materials. It has been known that the newly developed, anisotropic nanostructure of polymers in nanoconfinement is significantly different from that in the bulk. In this research, we demonstrate 3(1) helical chain assembly in isotactic polypropylene (i-PP) under 2D confinement in two main crystalline phases: alpha- and gamma-phase crystals. Samples synthesized with a metallocene catalyst yield the.-phases. We found the integrated assembly of the threefold helical chains in both alpha- and gamma-phase crystals under confinement. The helical chain packing at the "four-methyl growth face" prefers to be aligned with the rod long axis. Furthermore, we demonstrate two unit-cell orientations of the gamma-phase crystal in which the c(gamma)-axis is consistent with the radial or axial direction under cylindrical confinement. The formation mechanism for the radial gamma-phase crystals lies in that the rapid growth direction of the alpha-phase lamellar from which the gamma-phase crystals are epitaxially grown is kinetically favored to be consistent with the rod long axis. More interestingly, the new axial gamma-phase crystal reflects a complex, multi-fold structural ensemble of threefold helices in two phases via epitaxial relationships.
Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

YH Song,KH Nitta,N Nemoto

DOI: https://doi.org/10.1021/ma030194d

IF: 5.5

2003-01-01

Macromolecules

Abstract:The microscopic infrared dichroism measurement is made on a quenched iPP thin film during the stepwise elongation to obtain the molecular orientation functions, f(am), and f(c), in the amorphous and the crystalline phases, respectively. Results reveal that the pseudo-affine deformation of the amorphous phase occurs for f(am) < 0.45 with f(c) = 1.85 f(am), and concurrent structure alternation of a small portion of crystallites is evidenced from a limited change in the degree of crystallinity V-c. The true stress-strain relationship on the mesoscale is discussed on the basis of an interpenetrating network model, in which thin threadlike strands composed of crystallites firmly connected through intercrystalline links (C network) penetrate through an elastic network composed of amorphous chains interconnected to each other with lamellae at cross-linking sites (CEAM network). Combining the Matsuoka viscoelastic constitutive equation and the Takayanagi model for the C network below and above the yielding point, respectively, and the affine deformation equation for the CEAM network, we are allowed to give a straightforward description of the local deformation upon necking.
Configurational-Conformational Statistics of Atactic Polypropylene

GC ALFONSO,DY YAN,ZP ZHOU

DOI: https://doi.org/10.1016/0032-3861(93)90128-w

IF: 4.6

1993-01-01

Polymer

Abstract:The configurational-conformational characteristics of polypropylene are discussed by considering every polymer chain as constituted by the periodic repetition of a sequence of monomeric units in a given configuration. Sample calculations are presented for the special case in which meso and racemic dyads are distributed according to Bernoullian statistics. Numerical results show that the characteristic ratio of atactic polypropylene reaches an asymptotic value of 5.34 when the size of the periodic sequence corresponds to six monomeric units. The temperature coefficient is calculated to be −1.34×10−3K−1, in good agreement with experimental data reported in literature. The characteristic ratio of the mean-square radius of gyration, 〈R2g〉nl2, obtained from our calculations for the atactic polymer is 0.86. The effect of the fraction of meso dyads in Bernoullian polypropylene chains on the conformational and configurational entropy is also evaluated.
Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Jian Kang,Feng Yang,Tong Wu,Huilin Li,Dongming Liu,Ya Cao,Ming Xiang

DOI: https://doi.org/10.1002/app.36357

IF: 3

2012-01-01

Journal of Applied Polymer Science

Abstract:Two isotactic polypropylene (iPP) samples (PP-A and PP-B) were obtained by utilizing two different heterogeneous ZieglerNatta catalysts in a given polymerization system. The molecular structure and conformational behavior of the samples were studied. The results of determination of xylene soluble material (XS) and 13C NMR showed that the average isotacticity of the samples were nearly same. However, the results of high-resolution high-temperature 13C NMR (HRHT 13C NMR) and successive self-nucleation and annealing (SSA) fractionation revealed that the amount of high isotacticity of PP-B was lower than that of PP-A, and the amount of relative medium and low isotacticity of PP-B was higher than PP-A, indicating that the stereodefect distribution of PP-B was more uniform than PP-A. The calculation of average meso sequence length from SSA was found to be in good agreement with that calculated from the results of HRHT 13C NMR. Moreover, Fourier transformation infrared was utilized to study the influence of stereodefect distribution on the conformational behavior of iPP. The result suggested that the molecular conformation of the PP-B was more disordered than PP-A, the regularity of molecular structure for PP-B was lower than that of PP-A. The related action mechanism and the influences of which on crystallization behavior were discussed. (C) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
Configurational‐conformational Statistics of Stereoirregular Polystyrene

ZP Zhou,DY Yan

DOI: https://doi.org/10.1002/mats.1996.040050510

1996-01-01

Macromolecular Theory and Simulations

Abstract:The dependence of the configurational-conformational characteristics, such as the mean-square end-to-end distance, the mean-square radius of gyration, and the temperature coefficient of the stereoirregular polystyrene chains on the fraction of meso dyads, P-m, was investigated, using the periodic condition method. The calculation shows that polystyrene has the most compact chain when P-m = 0.7, and the temperature coefficient of the characteristic ratio of the mean-square end-to-end distance reaches the minimum, -0.89 x 10(-3) K-1, at P-m = 0.5. The theoretical result of the mean-square radius of gyration for atactic polystyrene, [S2](1/2) = 0.2245 M(0.5106), shows good agreement with the experimental measurement in both bulk amorphous state and theta-solvent.
CONFIGURATIONAL-CONFORMATIONAL STATISTICS OF POLY(ETHYLENE-PROPYLENE)S

ZP Zhou,JY Li,DY Yan,XP Cai

DOI: https://doi.org/10.1081/mb-100001808

2001-01-01

Journal of Macromolecular Science Part B

Abstract:Using the periodic condition method of rotational isomeric state model, the mean-square end-to-end distance and the mean-square radius of gyration, as a function of composition and stereochemical tacticity, of Bernoullian poly(ethylene–propylene) chains were extensively calculated. When both the fraction of ethylene monomers and the fraction of meso dyad (fm ) in the propylene sequence are 0.5, the characteristic ratio calculated for the mean-square end-to-end distance of PEP first decreases monotonously before reaching its minimum at N = 3, where N is the length of the periodic microstructure sequence. Then it increases and passes through a shallow extreme value at N = 5, and finally goes gradually to its asymptotic value. A substantial independence of this conformational characteristic from the period length is achieved when it is greater than 6. Theoretical data are comparable with the experimental results for alternating PEP. The stereochemical structure of the propylene sequence has a strong influence on the characteristic ratio of the chain when the occurrence probability of ethylene units is low. There is a variation of only 7.2% for ⟨S2 ⟩/nl2 for fm from 0.90 to 1.0.
Configurational-Conformational Statistics of Stereoirregular Poly(Methyl Methacrylate)S

DY Yan,ZP Zhou

DOI: https://doi.org/10.1080/00222349908212426

1999-01-01

Abstract:The mean-square radius of gyration of poly(methyl methacrylate) (PMMA) with Bernoullian statistics was theoretically investigated utilizing the method of periodic condition. The dependent curve of the characteristic ratio of mean-square end-to-end distance on periodic microstructure length increases monotonously with the length and goes gradually to its asymptotic value for atactic PMMA chains (P-m = 0.5). Conformational energies E-alpha similar to 1.3 kcal mol(-1) and E-beta similar to -0.6 kcal mol(-1) of the two-state scheme are acceptable, from which the derived mean-square end-to-end distance and mean-square radius of gyration conform to the experimental data. The ratio [S-2]/x of atactic PMMA (P-m = 0.2) as a function of the degree of polymerization x first increases with increasing chain length, then passes through a maximum at x = 30, and finally decreases to its asymptotic value, which is in reasonable agreement with the experimental measurements reported elsewhere, The ratio [S-2]/x as a function of stereochemical composition indicates that theoretical and experimental data are in accord for isotactic and atactic PMMA, but small-angle neutron scattering (SANS) measurements are higher than the calculated values for syndiotactic PMMA.
Unveiling Chain–chain Interactions in CO 2 -Based Crystalline Stereocomplexed Polycarbonates by Solid-State NMR Spectroscopy and DFT Calculations

Zhenchao Zhao,Pengju Ren,Ye Liu,Kangbo Zhao,Xiao-Bing Lu,Weiping Zhang

DOI: https://doi.org/10.1016/j.jechem.2017.12.016

IF: 13.1

2018-01-01

Journal of Energy Chemistry

Abstract:CO2-based stereocomplexed polycarbonates derived from the intermolecularly interlocked interaction between the enantiopure polymers with the opposite configuration exhibit high crystallinity, excellent thermal and mechanical stabilities. Deep insights into the mechanism of stereocomplexation are of particular importance to the design and manufacture of new promising and sustainable polycarbonates with enhanced physicochemical properties. Our solid-state NMR experiments linking with DFT computations clearly reveal the specific chain–chain interactions in a typical stereocomplexed poly (4,4-dimethyl-3,5,8-trioxabicyclo[5.1.0] octane carbonate) (PCXC). 13C CP/MAS NMR, 1H DUMBO MAS NMR and 13C/1H relaxation-time measurements indicate that the formation of stereocomplex reduces the local mobilities of carbonyl, methine and methylene groups in each chain of PCXC significantly. Through a combination of two-dimensional 1H13C HETCOR NMR and DFT calculation analysis, the cis-/trans- conformations and packing models of PCXC chains in the amorphous, enantionpure isotactic and stereocomplexed polycarbonates are identified. The splitting of 13C and 1H NMR chemical shifts of methine groups in the backbone carbon region demonstrates the ordered interlock interactions between the R- and S- chain in the stereocomplexed PCXC.
In Situ Ftir Spectroscopic Study of the Conformational Change of Isotactic Polypropylene During the Crystallization Process

XY Zhu,DY Yan,YP Fang

DOI: https://doi.org/10.1021/jp012165f

2001-01-01

Abstract:The conformational change of isotactic polypropylene (iPP) during the crystallization process has been carefully Studied by Fourier transform infrared (FTIR) spectroscopy. The experimental measurements show that the iPP melt system is stable when the persistence length of helical sequences is less than 12 monomer units. As soon as the helix length exceeds 12 monomer units, the 3(1) helix conformation extends quickly and then crystallization occurs. These results are discussed in terms of Imai's microphase separation theory. It can be found that the experimental observation agrees very well with Imai's theory.
Relationship between molecular structure, crystallization behavior, and mechanical properties of long chain branching polypropylene

Shuai Zhou,Weixia Wang,Zhong Xin,Shicheng Zhao,Yaoqi Shi

DOI: https://doi.org/10.1007/s10853-016-9856-0

IF: 4.5

2016-03-11

Journal of Materials Science

Abstract:AbstractThe crystallization behaviors and mechanical properties of both linear isotactic polypropylene (iPP) and long chain branching polypropylene (LCBPP) were investigated with differential scanning calorimetry, polarized optical microscopy, and wide-angle X-ray diffraction. The results indicated that the long chain branching (LCB) structure could act as nucleating agent accelerating the nucleation but impeding the crystal growth of LCBPP, and eventually increased the crystallization peak temperature and decreased the spherulite size of LCBPP. Moreover, with the presence of LCB structure, β-form polypropylene was generated in LCBPPs under injection molding conditions, and the content of β-form increased with the increasing of LCB structure content. Benefiting from the combined effect of the LCB structure and β-form crystal, the LCBPPs revealed not only outstanding toughness but also desired stiffness. The impact strength, flexural modulus and tensile strength of HMSPP3 were increased by, respectively, 260.0, 54.7, and 17.2 % than those of linear iPP. These results are helpful to develop new types of high performance polypropylene.

materials science, multidisciplinary
Density Functional Theory of Polymer Structure and Conformations.

Zhaoyang Wei,Nanying Ning,Liqun Zhang,Ming Tian,Jianguo Mi

DOI: https://doi.org/10.3390/polym8040121

IF: 5

2016-01-01

Polymers

Abstract:We present a density functional approach to quantitatively evaluate the microscopic conformations of polymer chains with consideration of the effects of chain stiffness, polymer concentration, and short chain molecules. For polystyrene (PS), poly(ethylene oxide) (PEO), and poly(methyl methacrylate) (PMMA) melts with low-polymerization degree, as chain length increases, they display different stretching ratios and show non-universal scaling exponents due to their different chain stiffnesses. In good solvent, increase of PS concentration induces the decline of gyration radius. For PS blends containing short (m1 = 1 − 100) and long (m = 100) chains, the expansion of long chains becomes unobvious once m 1 is larger than 40, which is also different to the scaling properties of ideal chain blends.
Understanding in the morphology and tensile behavior of isotactic polypropylene cast films with different stereo-defect distribution

Jian Kang,Bijin Xiong,Dongming Liu,Ya Cao,Jinyao Chen,Feng Yang,Ming Xiang

DOI: https://doi.org/10.1007/s10965-014-0485-5

IF: 3.061

2014-01-01

Journal of Polymer Research

Abstract:In this study, two iPP resins with similar molecular weight and average isotacticity but different uniformities of stereo-defect distribution were used in the production of cast films. The crystalline morphology and orientation, and tensile behavior during room temperature stretching of the cast films were investigated by scanning electronic microscopy (SEM), 2D-wide angle X-ray diffraction (2D-WAXD) and 2D-small-angle X-ray scattering (2D-SAXS). It was found that under fixed processing condition, iPP with more uniform stereo-defect distribution (PP2) favors the formation of row nucleated lamellar structure during cast film production, and therefore exhibiting hard-elastic deformation behavior during stretching; meanwhile, the sample with less uniform stereo-defect distribution (PP1) shows un-oriented spherulitical morphology in the cast film, and typical plastic deformation behavior during stretching. The crystallization and rheological analysis on the iPP raw materials revealed that, the uniformity of stereo-defect distribution determines the ability of nucleation and crystallization, and further influences the response of the crystalline morphology to the elongation effect of cast film production process, which is of great importance in the structure–property design in the production of iPP membranes.
Translation And Rotation Of Spherulites During The Crystallization Of Isotactic Polypropylene With Reduced Chain Entanglements

Xuehui Wang,Zhigang Wang,Kaifu Luo,Yong Huang

DOI: https://doi.org/10.1021/ma1025913

IF: 5.5

2011-01-01

Macromolecules

Abstract:The isothermal crystallization of isotactic polypropylene (iPP) spherulites was observed under chain entanglements, reduced chain entanglements, and unconfined thick film conditions using polarized optical microscopy (POM). While spherulite translations and rotations were not observed in entangled iPP samples, the growing spherulites in the entanglements-reduced crystallizing melt conspicuously translated and/or rotated, even when their sizes exceeded the sample film thicknesses. Our entanglements-reduced samples were prepared by first slowly crystallizing a commercial entangled iPP in mineral oil (and then extracting the mineral oil with hexane) and by a direct polymerization method, respectively. The purity of the entanglements-reduced iPP samples and the extent of chain entanglements were examined by thermogravimetric analysis (TA), gel permeation chromatography (GPC), and rheological measurements. Our findings seem to provide new clues into the crystallization of high molecular mass polymers.
Diversified Α-Phase Nanostructure of Isotactic Polypropylene under Cylindrical Confinement Via Cross Diffraction Analysis

Xingming Zeng,Shuailin Zhang,Nan Zheng,Shichen Yu,Xiaoguang Li,Masaki Ageishi,Bernard Lotz,Gengxin Liu,Yan Cao

DOI: https://doi.org/10.1016/j.polymer.2019.121647

IF: 4.6

2019-01-01

Polymer

Abstract:Understanding polymer nanostructures is a prerequisite to manipulate their physical properties. Molecular self-assembly under confinement effectively generates novel polymer nanostructures. However, in one confined system, diffraction signals of different nanostructures are merged in a typical two-dimensional (2D) wide-angle X-ray diffraction (WAXD) measurement. For comparison, selected-area electron diffraction (SAED) of transmission electron microscopy can precisely capture the “local” diffraction signal of an individual nanoscale entity. Here, using isotactic polypropylene (i-PP) as a model polymer, we have demonstrated a cross-analysis of global X-ray and local electron diffraction results to fully reveal the structural details of i-PP nanorods. For the first time, we have decomposed completely the “mixed” 2D WAXD patterns of i-PP nanorods into five types of α-phase nanostructures: (a). Left-tilted daughter crystals; (b) Right-tilted daughter crystals; (c) Double-tilted daughter crystals; (d) a*-axis oriented crystals; (e) b-axis oriented crystals.
Temperature Dependence of Molecular Conformation in Uniaxially Deformed Isotactic Polypropylene Investigated by Combination of Polarized Ftir Spectroscopy and 2d Correlation Analysis

Jia-Zhuang Xu,Ling Xu,Yuan-Ying Liang,Gan-Ji Zhong,Jun Lei,Zhong-Ming Li

DOI: https://doi.org/10.1002/polb.23683

2015-01-01

Abstract:Evolution of molecular conformation in uniaxially deformed isotactic polypropylene (iPP) as a function of temperature is investigated by time-resolved polarized Fourier-transform infrared spectroscopy. It is observed that oriented crystals (microfibrils) induced by deformation possess better thermal stability compared with isotropic spherulites. 2D correlation analysis reveals that the relaxation process of ordered helices in deformed iPP could be divided into two regions referring to the melting of different crystalline structures. No obvious sequential change of ordering conformations observed in low temperature region is attributed to melting of defective or destructed crystals. However, notable sequential changes of helices occur in the high temperature region; interestingly, long helices are more thermally stable than short helices. The central region of microfibrils is suggested to consist of a large amount of long helical bundles, and the short ordering segments are primarily located in the outer lateral surfaces. A physical picture of the conformational distribution in deformation-induced microfibrils is thus gained. (c) 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015, 53, 673-684
Confirmation Of The X-Ray-Analyzed Heterogeneous Distribution Of The Pdla And Plla Chain Stems In The Crystal Lattice Of Poly(Lactic Acid) Stereocomplex On The Basis Of The Vibrational Circular Dichroism Ir Spectral Measurement

Kohji Tashiro,Hai Wang,Naoto Kouno,Jun Koshobu,Keisuke Watanabe

DOI: https://doi.org/10.1021/acs.macromol.7b01573

IF: 5.5

2017-01-01

Macromolecules

Abstract:In the previous report we proposed, on the basis of the detailed X-ray diffraction data analysis, the crystal structure of PLLA/PDLA stereocomplex (SC) with the space group P3, which is different from the R3c = R (3) over barc or Ric models proposed in the literature. The most important point of the change of the structure model is to explain the experimental data that the SC can be formed in the region of the L/D ratio of 70/30-30/70, not only for the L/D = 50/50 ratio. In our P3 structural model, one crystal site is occupied by the Ru and Ld (or Rd and Lu) (3/1) helices at the statistical probability determined by the L/D ratio, where R and L indicate the right-handed and left-handed helical chains and u and d show the upward and downward directionality along the chain axis, respectively. In other words, the D and L chain stems can coexist in a heterogeneous way in the SC crystalline lattice. This structural model has been supported experimentally from the totally different point of view on the basis of the vibrational circular dichroism IR spectral measurement. When the right-handed (r) and left-handed (I) circularly polarized IR beams are incident to the optically active chemical species, the ratio between the r and 1 band intensity changes depending on the relative content of the R and L species (IR circular dichroism). The IR circular dichroism of PLLA/PDLA blend sample was found to change its dichroic ratio depending on the L/D content in the sample. The most important finding is that the dichroic ratio change was detected not only for the amorphous IR bands but also for the crystalline bands, indicating definitely that the D and L chain stems can coexist in the crystalline region at the various L/D ratios as proposed by the X-ray structure analysis.
Stem Tilt in Α-Form Single Crystals of Isotactic Polypropylene: A Manifestation of Conformational Constraints Set by Stereochemistry and Minimized Fold Encumbrance

Yan Cao,Ryan M. Van Horn,Hao-Jan Sun,Guoliang Zhang,Chien-Lung Wang,Kwang-Un Jeong,Finizia Auriemma,Claudio De Rosa,Bernard Lotz,Stephen Z. D. Cheng

DOI: https://doi.org/10.1021/ma102902y

IF: 5.5

2011-01-01

Macromolecules

Abstract:Two high molecular weight (MW) isotactic polypropylene (i-PP) samples, one containing a small amount of rr stereodefects denoted R1 and one conventional, commercial i-PP denoted Si, were used to grow single crystals in thin films at high temperatures (T-x = 145 degrees C for R1, T-x = 155 degrees C for S1). Elongated alpha(2)-form lathlike single crystals could be found in these two samples, indicating that the growth of this type of single crystal is a general phenomenon in i-PP and is independent of the small amount of tacticity defects. On the basis of our selected area electron diffraction (SAED) experimental results, the stems in these lathlike single crystals were tilted at an unusual 17 degrees angle around the b-axis (i.e., a rotation of 17 degrees of the c-axis within the ac-plane toward the a-axis direction), while in the traditional scheme of the a-form in i-PP, the stem axis is understood to be normal to the fold surface. This 17 degrees stem tilt in the alpha(2)-form, lathlike single crystals grown at high T-x values appears to depend upon two constraints: (a) the conformational restrictions on chirality and clinicity of isotactic polyolefin stems linked by a fold, as analyzed by Petraccone et al. [Polymer 1986, 27, 1665; Eur, Polym. J. 1989, 25,43], and (b) a minimized encumbrance at the fold surface can be achieved by those folds which start from and end on the chemical bonds normal to the fold surface with a favorable gauche conformation of i-PP chains. This is because in i-PP (and most isotactic polyolefins) with a helical stem conformation every other chemical bond is nearly parallel (in a trans conformation) or perpendicular (in a gauche conformation) to the stem axis (and thus, nearly within or normal to the fold surface). The combination of these two constraints favors a (10 (2) over bar) fold surface in the i-PP case, as is observed in this study.

Theoretical-Analysis for Configurations of Stereoregular Isotactic Polypropylene Chains

A Study of Molecular Orientation of Polymethylene Chains

Average bond conformations of polymer chains

Configuration-Dependent Properties Of Poly(Dimethylsiloxane) Chain

Structural Ensemble of Molecular Chains in Isotactic Polypropylene under Cylindrical Confinement

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Configurational-Conformational Statistics of Atactic Polypropylene

Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Configurational‐conformational Statistics of Stereoirregular Polystyrene

CONFIGURATIONAL-CONFORMATIONAL STATISTICS OF POLY(ETHYLENE-PROPYLENE)S

Configurational-Conformational Statistics of Stereoirregular Poly(Methyl Methacrylate)S

Unveiling Chain–chain Interactions in CO 2 -Based Crystalline Stereocomplexed Polycarbonates by Solid-State NMR Spectroscopy and DFT Calculations

In Situ Ftir Spectroscopic Study of the Conformational Change of Isotactic Polypropylene During the Crystallization Process

Relationship between molecular structure, crystallization behavior, and mechanical properties of long chain branching polypropylene

Density Functional Theory of Polymer Structure and Conformations.

Understanding in the morphology and tensile behavior of isotactic polypropylene cast films with different stereo-defect distribution

Translation And Rotation Of Spherulites During The Crystallization Of Isotactic Polypropylene With Reduced Chain Entanglements

Diversified Α-Phase Nanostructure of Isotactic Polypropylene under Cylindrical Confinement Via Cross Diffraction Analysis

Temperature Dependence of Molecular Conformation in Uniaxially Deformed Isotactic Polypropylene Investigated by Combination of Polarized Ftir Spectroscopy and 2d Correlation Analysis

Confirmation Of The X-Ray-Analyzed Heterogeneous Distribution Of The Pdla And Plla Chain Stems In The Crystal Lattice Of Poly(Lactic Acid) Stereocomplex On The Basis Of The Vibrational Circular Dichroism Ir Spectral Measurement

Stem Tilt in Α-Form Single Crystals of Isotactic Polypropylene: A Manifestation of Conformational Constraints Set by Stereochemistry and Minimized Fold Encumbrance