Abstract:Color Plasma Display Panels (PDPs) has become one of the important developing trends in the information display field, phosphor is of critical role to the performance of PDPs. The phosphor in PDPs is coated by screen printing method. In the process of making into phosphor paste for screen printing and in the process of fabricating the PDPs, the performance of phosphor might be decreased. This is processing deterioration. After PDPs being finished the performance of phosphor could be decreased further with the continuous operation of PDPs. This is timing deterioration. The causes of occurring processing deterioration and timing deterioration are analyzed. The monocolor experimental PDP is manufactured. Chromaticity coordinates of phosphor in the PDP are measured by the CRT Color Analyzer (CA-100) which are compared with the chromaticity coordinates supplied by the phosphor manufacturer. Much data of processing deterioration and timing deterioration of phosphor is obtained. The experiment results show that (1) the processing deterioration of green phosphor (Zn 2SiO 4∶Mn 2+) and blue phosphor(BaMgAl 10O 17∶Eu 2+) is serious; (2) the timing deterioration of blue phosphor is most serious, y and x coordinate increasing by 10% and 5% respectively. We think (1) amending the phosphor paste ingredients and composition which results in the decrease of sintering temperature of phosphor, and using phosphor with larger specific surface area will be helpful to prevent the phosphors from processing deterioration; (2) amending the performance of MgO to enhance its anti-sputter ability, and using new driving method to prevent the phosphors from ion bombardment is helpful to improve the timing deterioration.

Study On The Relationship Between The Printing Properties Of The Phosphor Paste And Static Margin Of The Pdp

Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

Study on Deterioration of Phosphors for Color PDP

Influence of Discharge Gap and Display-electrode Width on Optical and Electrical Characteristics of Color AC-PDP

Study on Automatic Power Control in Color Plasma Display Panel

A Study of Sntering Furnace and Its Technique for PDP

Effects of Sustaining Voltage on Optical and Electrical Parameters of Color Alternating Current Plasma Display Panel

Progress in Research on Red Phosphors for Plasma Display Pannels

Perylene-Based Fluorescent Sizing Agent for Precise Evaluation of Permeability and Coating Property of Sizing Paste

Effects of Xe Gas Content and Total Gas Pressure on the Discharge Characteristics of Colour Plasma Display Panels

Study on Ne-Ar-Xe gas mixture used in color alternating-current plasma display panel

Study of Gray Correction of Color Plasma Display Panel

Research on a novel surface lamp-house based on AC-PDP principle

Effects of phosphor’s thickness and concentration on performance of white LEDs

Effect of phosphor settling on the optical performance of phosphor-converted white light-emitting diode

Study on Phosphor Sedimentation Effect in White Light-Emitting Diode Packages by Modeling Multi-Layer Phosphors with the Modified Kubelka-Munk Theory

Investigation to improve the printing accuracy of low-temperature paste based on rheological and optical measurement

Study of Improving Luminous Efficacy of Plasma Display Panel in Sustain Period with Nanosecond Pulse Drive of Adjustable Waveform

Electrical and Optical Characteristics of a Color Alternating Current Plasma Display Panel with Floating Electrodes

Alternating Current Plasma Display Panel with Two Trigger Discharge Sites and Its Driving Techniques

Advance in the Research of Protective Layer Materials in AC Plasma Display Panels