Abstract:Due to the lack of natural water resources and the rapid growth of population and economy, China is currently facing the pressing challenge of water shortage. Current evidence suggests that the traditional water resources including surface water and groundwater could not be enough to sustain increasing water demand which has been projected to hit 8.80x10(11) m(3) by 2030. Facing to such a critical situation, it is absolutely necessary to explore non-traditional water resources in order to meet future water demand. As such, municipal wastewater should be regarded as an emerging water resource rather than a waste. Presently various biological processes with activated sludge as the core have been commonly adopted for municipal wastewater treatment in China. However, these conventional activated sludge processes have been suffering from high energy consumption, large amount of excess sludge, low resource recovery efficiency, greenhouse gas emission, etc. On the other hand, the process upgrading is becoming inevitable in order for the effluent to meet increasingly strict national discharge standards. However, it should be pointed out that the current practice of process upgrading is mainly based on a simple add-on-driven philosophy, i.e., the existing biological treatment processes are expanded by including various posttreatment units for polishing soluble COD, nitrogen and phosphorus. Obviously, such an add-on-based practice inevitably leads to extremely complex process configuration, difficulty in process operation, increasing treatment costs, energy consumption and large footprint. In fact, a fundamental question to be addressed is what the primary function of municipal wastewater treatment is in the future. This article thus argues that future wastewater treatment plant should primarily serve as a nontraditional water factory that is able to supply high-quality product water, with the ultimate goal of closing wastewater-water loop. One of such examples is the integrated anaerobic membrane bioreactor and reverse osmosis process that offers a feasible engineering solution for producing high-grade water from municipal wastewater, with substantially reduced energy consumption and excess sludge production. In this integrated process, almost all soluble COD in municipal wastewater could be directly converted to biomethane gas with minimized sludge production, while the majority of soluble nutrients (e.g., ammonium and phosphate) could be effectively rejected by reverse osmosis membrane. However, in some circumstances, the ammonium concentration in reverse osmosis permeate might not meet the standards for high-grade product water when treating municipal wastewater with high ammonium concentration. As such, adsorption could be considered as a promising technology for polishing the effluent from the proposed integrated process, and different kinds of adsorbents for ammonium removal were also reviewed, ranging from conventional zeolite, biochar, ion exchange resin to advanced nanomaterials. It appears that more efforts are needed to develop novel adsorbents with high adsorption capacity and selectivity for ammonium, which are becoming possible with advances of material science and engineering. Consequently, it is demonstrated in this review that municipal wastewater as an important fresh water resource should first be fully collected and then reclaimed to high-grade product water which is a game changer in closing water loop, while helping to prolong water life cycle and alleviating the pressure of urban water shortage.

Demonstrating Water Stewardship Through Integrated Wastewater Management The City Of Kingston, Ontario, Canada

Membrane Bioreactor–Treated Domestic Wastewater for Sustainable Reuse in the Lake Victoria Region

ADVANCED TREATMENT TECHNOLOGIES OF PAPER MILL WASTEWATER BY OZONE-BIOLOGICAL AERATED FILTER PROCESS

Upgrade of Three Municipal Wastewater Treatment Lagoons Using a High Surface Area Media

One Step Further to Closed Water Loop: Reclamation of Municipal Wastewater to High-Grade Product Water

A sustainable integrated anoxic/aerobic bio-contactor process for simultaneously in-situ deodorization and pollutants removal from decentralized domestic sewage

Case Study on Technical Renovation and Upgrading of AAO Processes by MBBR Technology

Development of an Advanced Biological Treatment System Using Bioaugmentation Technology for the Treatment of Eutrophic Drinking Water Resources

Underground structure pattern and multi AO reaction with step feed concept for upgrading an large wastewater treatment plant

Waste Activated Sludge-High Rate (WASHR) Treatment Process: A Novel, Economically Viable, and Environmentally Sustainable Method to Co-Treat High-Strength Wastewaters at Municipal Wastewater Treatment Plants

Biological Removal of Nutrients Using Hybrid Technology

New approaches to enhance pollutant removal in artificially aerated wastewater treatment systems

'One River, Two Systems': Hong Kong's River Management

Bacterial Removal Performance and Community Changes During Advanced Treatment Process: A Case Study at a Full-Scale Water Reclamation Plant.

Anaerobic baffled reactor followed by up-flow constructed wetland for treatment of municipal wastewater

Evaluation of Technological Solutions to Enhance the Operational Efficiency of the WWTP "Apa-Canal" Magdacesti Municipal Enterprise

Evolving Wastewater Infrastructure Paradigm to Enhance Harmony with Nature.

Application of floating wetlands for the improvement of degraded urban waters: Findings from three multi-year pilot-scale installations

Environmental tradeoffs in municipal wastewater treatment plant upgrade: a life cycle perspective

Biochar integrated reactive filtration of wastewater for P removal and recovery, micropollutant catalytic oxidation, and negative CO2e: Process operation and mechanism

From wastewater treatment to water resource recovery: Environmental and economic impacts of full-scale implementation