Abstract:One of the major applications (40% in Europe) of plastic is packaging, which is often printed to display required information and to deliver an attractive aesthetic for marketing purposes. However, printing ink can cause contamination in the mechanical recycling process. To mitigate this issue, the use of surfactants in an alkaline washing process, known as de-inking, has been employed to remove printing ink and improve the quality of recyclates. Despite the existence of this technology, there are currently no data linking the de-inking efficiency with typical printing ink compositions. Additionally, it is necessary to investigate the de-inking process under the process parameters of existing recycling plants, including temperature, NaOH concentration, and retention time. This study aims to evaluate the performance of commonly used printing inks with different compositions under various washing scenarios for plastic recycling in conjunction with different de-inking detergents containing surfactants or mixtures of surfactants. The results indicate that the pigments applied to the ink have no significant effect on the de-inking process, except for carbon black (PBk 7). Nitrocellulose (NC) binder systems exhibit high de-inkability (over 95%) under the condition of 55 °C and 1 wt.% NaOH. However, crosslinked binder systems can impede the de-inking effect, whether used as a binder system or as an overprint varnish (OPV). The de-inking process requires heating to 55 °C with 1 wt.% NaOH to achieve a substantial effect. Based on the findings in this work, breaking the Van der Waals forces, hydrogen bonds, and covalent bonds between the printing ink and plastic film is an essential step to achieve the de-inking effect. Further research is needed to understand the interaction between surfactants and printing inks, enabling the development of de-inkable printing inks and high-performance surfactants that allow for de-inking with less energy consumption. The surfactant and NaOH have a synergistic effect in cleaning the printing ink. NaOH provides a negative surface charge for the adsorption of the cationic head of the surfactant and can hydrolyze the covalent bonds at higher concentrations (>2 wt.%).

Optimization Of Flotation Parameters In Deinking Of Onp And Omg

The Influence of Polyether Structure on Deinking Efficiency

Analysis Of Electrochemical Character Affecting Deinking Efficiency Of Onp

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Flotation de-inking for recycling paper: contrasting the effects of three mineral oil-free offset printing inks on its efficiency

Study on optimal conditions of flocculation in deinking wastewater treatment

Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Membrane fouling in a hybrid process of enhanced coagulation at high coagulant dosage and cross-flow ultrafiltration for deinking wastewater tertiary treatment

Operating conditions on the optimization and water quality analysis on the advanced treatment of papermaking wastewater by coagulation/Fenton process

Optimization and Characterization of Polysaccharide-Based Bioflocculant Produced by Paenibacillus Elgii B69 and Its Application in Wastewater Treatment

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Control and Effects of pH of Printing and Dyeing Wastewater on Activated Sludge

Synergistic effect of cellulo-xylanolytic and laccase enzyme consortia for improved deinking of waste papers

Industrial trial results on enzymatic deinking and fiber modification of old newsprint with cellulase from aspergillus L22

Enzymatic Deinking of Old Newspaper

Improvement of Acidification on Dewaterability of Oily Sludge from Flotation

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification