Finite Element Analysis And Experimental Study For Torsional Stiffness Of The Large Radio Telescope

Tang Aofei,Qiu Yuanying,Duan Baoyan

2006-01-01

Abstract:The torsional stiffnesses of the six-cable and the nine-cable structure for the Large Radio Telescope (LT) were analyzed by the Finite Element Analysis (FEA) and experiments. To improve the torsional stiffness of the cable-cabin system for LT, the structural-passive-control-cable scheme was proposed, which means using the nine-cable system as a substitute for the six-cable one and heightening ability of restricting torsional vibration. Firstly, based on the nonlinear static analysis and the optimization model of the cable-cabin system, the initial static position-shape and initial stress of this strong geometry nonlinear system were obtained to construct the nonlinear geometry stiffness matrix of this structure. The FEA models of the cable-cabin system for LT5m scaled model involving the six-cable and the nine-cable structure were next established with ANSYS software, and the torsional stiffness values were gained by parameterizing the FEA model with ANSYS Parameter Design Language (APDL) when both systems rest on the same position and orientatiom Finally, the torsional stiffness experiments were performed to validate the FEA model. The results demonstrate that the FEA analysis and the experimental results are consistent, the FEA models for LT5m are effective, and the nine-cable structure can improve the torsional stiffness of the six-cable one. These theoretical and experimental results will lay the foundation of the mathematical modeling and analysis for LT500m prototype.