Abstract:The different components, parameters and positions of porous medium corn were simulated by COMSOL, and effective drying strategies and improvement measures of air drying silo were put forward. Drying is an effective way to solve corn mildew. The heat and humidity flow interface in COMSOL Multiphysics heat transfer module was used to coupling fluid flow, water transport and heat transfer in multiple physical fields, and corn was used as a porous medium for simulation analysis, aiming to find the change rules of temperature field and humidity field. The research shows that the multi‐component model and method should be given priority in practice. The higher the hot air temperature is, the higher the average temperature of corn kernels is, and the faster the relative humidity decreases. The drying rate of corn is the highest at 348 K, and the hot air temperature should be appropriately increased at 333 K denaturation temperature. The higher the wind speed, the better the drying effect of corn kernels, but the improvement of drying effect will decrease with the increase of wind speed. Appropriately increase the wind speed between 2 and 4 m/s to improve the drying efficiency while avoiding excessive energy consumption. The mass transfer resistance of the pericarp cannot be ignored. The drying time of corn kernels closer to the hot air entrance is shorter, and the corn kernels close to the hot air exit are prone to humidity accumulation. Multiple hot air intakes should be set up to reduce the occurrence of uneven drying. Practical applications Corn is prone to mildew after harvest, resulting in resource waste and economic loss, so it is of great significance to dry corn efficiently. Corn is a typical porous medium, and the research on it can provide the basis for drying other porous medium grains. According to different components, the model of single granule and multi‐granule was established respectively. Use COMSOL Multiphysics simulation software to gain a deeper understanding of the complex physical processes involved in the drying process and provide valuable insights for industrial applications. COMSOL software was used to study the drying condition of corn under the synergic action of multiple physical fields, and effective drying strategies and measures to improve the structure of air drying silo were put forward.

Modeling And Experimental Study Of Heat And Humidity Transfer Based On The Grain Storage Real-Time Monitoring

A Model for Predicting and Grading the Quality of Grain Storage Processes Affected by Microorganisms under Different Environments.

Modeling grain quality characteristics via dynamic models using sensing data

Numerical Study to Predict Temperature and Moisture Profiles in Unventilated Grain Silos at Prolonged Time Periods

Theoretical And Experimental Study Of Solar Assisted Heat Pump System For Grain Storage Drying

Computer simulation of temperature changes in a wheat storage bin

A Design Method for an SVM-Based Humidity Sensor for Grain Storage

A Prediction Method For Interior Temperature Of Grain Storage Via Dynamics Models: A Simulation Study

Real‐time equilibrium moisture content monitoring to predict grain quality of corn stored in silo and raffia bags

Modeling of a Three-Dimensional Dynamic Thermal Field under Grid-Based Sensor Networks in Grain Storage

Mathematical modeling and multivariate analysis applied earliest soybean harvest associated drying and storage conditions and influences on physicochemical grain quality

Experimental Study on the Status of Maize Mycotoxin Production in Farmers' Grain Storage Silos in Northeastern China

Digital Monitoring Of Grain Conditions In Large-Scale Bulk Storage Facilities Based On Spatiotemporal Distributions Of Grain Temperature

Warehouse multipoint temperature and humidity monitoring system design based on Kingview

Research on drying characteristics of corn kernel based on COMSOL porous media model

A Monitoring Device and Grade Prediction System for Grain Mildew

Quasi-Distributed Fiber Optic Temperature and Humidity Sensor System for Monitoring of Grain Storage in Granaries

Experimental and Theoretical Assessment of a Solar Assisted Heat Pump System for In-Bin Grain Drying: A Comprehensive Case Study

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Constructing a physical-mathematical model of grain mass self-heating by a rod site of rectangular cross-section

Equilibrium Moisture Content and Dioxide Carbon Monitoring in Real-Time to Predict the Quality of Corn Grain Stored in Silo Bags using Artificial Neural Networks