Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Optimization Of Methyl Orange Wastewater Treatment By Micro-Electrolysis Using Response Surface Methodology

Treatment of Methyl Orange Wastewater by Electrochemical Catalytic Oxidation

Efficient degradation of methyl orange in wastewater via bio‐electro‐Fenton system: Optimization, pathway investigation and process evaluation

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Electrocoagulation-Tio2 Photo-Assisted Combined System Applied to Methyl Orange Wastewater Removal

Optimization of wet air oxidation of cationic red X-GRL wastewater by response surface methodology

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Treatment of wastewater containing methyl orange dye by fluidized three dimensional electrochemical oxidation process integrated with chemical oxidation and adsorption

Research on Optimization for Phosphorus Removal with Ferrous Salt Process

Treatment of methyl orange dye wastewater by cooperative electrochemical oxidation in anodic-cathodic compartment

Parametric Study of Methyl Orange Removal Using Metal–Organic Frameworks Based on Factorial Experimental Design Analysis

Effect and mechanism of iron-carbon micro-electrolysis pretreatment of organic peroxide production wastewater

Electrochemical Oxidation of Methyl Orange in an Active Carbon Packed Electrode Reactor (ACPER): Degradation Performance and Kinetic Simulation

Application of response surface methodology for optimization of methyl orange adsorption by Fe-grafting sugar beet bagasse

Optimization of fenton and electro-fenton oxidation of biologically treated coking wastewater using response surface methodology

Modeling and optimizing Orange G removal by heat-activation persulfate using two-step statistical strategies: Plackett-Burman and Box-Behnken designs

Optimized O3/Fe(II) Using Response Surface Methodology for Organic Phosphorus Removal in Tetrakis(hydroxymethyl)phosphonium Sulfate Wastewater

Degradation of methylene blue: optimization of operating condition through a statistical technique and environmental estimate of the treated wastewater.

Response surface modeling for the treatment of methylene blue from aqueous media using electro-Fenton process before determination by UV-VIS spectrometer: Kinetic and degradation mechanism

Adsorption of methyl orange by adsorbent derived from sewage sludge

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology