Abstract:The recirculating planetary roller screw mechanism (RPRSM) is a transmission mechanism that engages the screw and nut threaded by multiple grooved rollers. In this paper, firstly, the design method of RPRSM nut threadless area is proposed, and the equations related to the structural parameters of nut threadless area are derived. On this basis, the cross-section design method of roller, screw and nut is constructed according to the actual situation of engagements between the screw/nut and the roller. By adjusting the gap between the two beveled edges and that between the arc and the beveled edge, the accuracy of the thread engagements between the screw/nut and the roller can be improved. Secondly, to ensure the engagements of the screw/nut and the roller, the distance equation from the center surface of the different rollers to the end surface of cam ring is given. Thirdly, combined with the working principle and structural composition of RPRSM, the component model is established according to its relevant structural parameters, and the virtual assembly is completed. Finally, the 3D model is imported into the ADAMS simulation software for multi-rigid body dynamics. The dynamic characteristic is analyzed, and the simulated values are compared with the theoretical values. The results show that the contact forces between the screw/nut and the roller are sinusoidal, mainly due to the existence of a small gap between the roller and the carrier. The maximum collision forces between the roller and cam ring are independent from load magnitude. Normally, the collision force between the roller and the carrier increases as the load increases. When RPRSM is in the transmission process, the roller angular speed in nut threadless area begins to appear abruptly, and the position of the maximum change is at the contact between the roller and the convex platform of cam ring. The design of the nut threadless area and the proposed virtual assembly method can provide a theoretical guidance for RPRSM research, as well as a reference for overall performance optimization.

Dynamic Stiffness Model Of Planetary Roller Screw Mechanism With Clearance, Geometry Errors And Rolling-Sliding Friction

The Dynamic analysis of Planetary roller screw in Tree-climbing robot

Analytical and Experimental of Planetary Roller Screw Axial Stiffness

Review on Motion and Load-Bearing Characteristics of the Planetary Roller Screw Mechanism

Dynamic Characteristic and Experiment Analysis of Planetary Roller Screw

Dynamic characteristic analysis of a planetary roller screw in operating process

An efficient method for the dynamic analysis of planetary roller screw mechanism

Kinematic modeling of a planetary roller screw mechanism considering runout errors and elastic deformation

A novel static model of planetary roller screw mechanisms based on an energy method

Dynamics of the Planetary Roller Screw Mechanism

Dynamic Characteristic Analysis Based on Finite Element Simulation for Planetary Roller Screw

Research on Fractal Model of Load Distribution and Axial Stiffness of Planetary Roller Screw Mechanism Considering Surface Roughness and Friction Factor

A mathematical model for load distribution of planetary roller screw with pitch deviation

Multi-rollers statics analysis of planetary roller screw mechanism based on explicit expression

Nonlinear dynamics of planetary roller screw mechanism

Design and Dynamic Analysis of the Recirculating Planetary Roller Screw Mechanism

Load Distribution Analysis and Contact Stiffness Prediction of the Dual-Drive Ball Screw Pair Considering Guide Rail Geometric Error and Slide Position

Mixed-lubrication Analysis of Planetary Roller Screw

Dynamic Forces and Vibrations of the Planetary Gear-Set Radial Bearings with the Roller Dimension Deviation

Analysis and Simulation Verification of Mechanical Properties for Planetary Roller Screw Mechanism

Variable-Coefficient Dynamic Modeling Method for a Ball Screw Feed System in the No-Extra-Load Running State