Abstract:ABO3 basic catalysts were synthesized by the nitrate-b-alanine solution combustion method at about 400 °C. The powders were formed by combustion route in times up to 5 min and presented high crystallinity and a single-phase, without the calcination step. XRD analyses showed that the oxides containing calcium (CaZrO3 and Ca0.9Li0.6Zr0.9O3) presented perovskite structure with the orthorhombic system, whereas a monoclinic structure was observed in the oxide Li2ZrO3. The catalysts were characterized by FEG-SEM, TPD-CO2, TGA, N2 physisorption (BET) and ICP OES. The catalytic activity of the materials was tested in the transesterification of both methyl acetate (model reaction) and soybean oil with ethanol to produce biodiesel. Ca0.9Li0.6Zr0.9O3 was the most active oxide in the model reaction, reaching a maximum conversion in ethyl acetate of 92%, followed by the oxide Li2ZrO3, with the conversion of 64%. The CaZrO3 catalyst conversely presented negligible catalytic activity. Reuse tests have indicated that the catalysts containing Li can be reused for up to six reaction cycles, with an average conversion of around 50% up to its sixth reuse. Ca0.9Li0.6Zr0.9O3 also shows promising for the biodiesel production since its FAEEs yield was good (60% m/m) under mild reaction conditions (molar ratio oil/ethanol 1:12 and 50 °C for 30 min). It was noticed that the incorporation of Li to calcium zirconate has resulted in more efficient and promising catalysts for the transesterification, what is possibly related to the textural and basic alterations occurred with the Li insertion. Although the metallic ions leaching of the most active materials has been detected, no reaction was observed in homogeneous phase.

Synthesis of CaO-CeO2 Catalysts by Soft Template Method for Biodiesel Production

Soft-template synthesis of sulfonated mesoporous carbon with high catalytic activity for biodiesel production

Preparation of CaO@CeO2 Solid Base Catalysts Used for Biodiesel Production

Multifunctionalized Ordered Mesoporous Carbon As an Efficient and Stable Solid Acid Catalyst for Biodiesel Preparation

Transesterification of Pistacia chinensis oil for biodiesel catalyzed by CaO–CeO2 mixed oxides

Synthesis of Calcium Materials in Biochar Matrix As a Highly Stable Catalyst for Biodiesel Production

Design of Anti-Saponification Ca-based Catalyst with Porous-Shell Structure from Crustacean Waste for Biodiesel Production

Synthesis of Biodiesei Catalyzed by CaO Supported on Molecular Sieve Prepared by Microwave

Synthesis of Special Morphology Calcium Oxide and its Catalysis in Biodiesel Preparation

Transesterification of Vegetable Oil to Biodiesel over Mgo-Li2o Catalysts Templated by A Pdms-Peo Comb-Like Copolymer

Biodiesel Production Using MgO–CaO Catalysts via Transesterification of Soybean Oil: Effect of MgO Addition and Insights of Catalyst Deactivation

Biodiesel production through the transesterification of rapeseed oil over CaO‐MgO/SBA‐15 catalysts

Structural study of mixed metal oxide catalysts comprising Mg, Ca, and Al used for upgrading biodiesel byproduct glycerol to glycerol carbonate

Transesterification of Soybean Oil to Biodiesel Using Cao As A Solid Base Catalyst

Calcium Ethoxide as a Solid Base Catalyst for the Transesterification of Soybean Oil to Biodiesel

MgO–Li 2 O catalysts templated by a PDMS–PEO comb-like copolymer for transesterification of vegetable oil to biodiesel

Catalytic Transesterification to Biodiesel at Room Temperature over Several Solid Bases

Synthesis of Biodiesel from Model Acidic Oil Catalyzed by a Novel Solid Acid Catalyst SO42−/C/Ce4+

Production and Optimization of Biodiesel in a Membrane Reactor, Using a Solid Base Catalyst

A Decade of Effort in Addressing the Grand Challenges in Catalysis

A Highly Effective Biomass-Derived Solid Acid Catalyst for Biodiesel Synthesis Through Esterification