Abstract:A plastic microfluidic device that integrates a filter disc as a DNA capture phase,was successfully developed for low-cost, rapid and automated DNA extraction and PCR amplification from various raw samples. The microdevice was constructed by sandwiching a piece of Fusion 5 filter, as well as a PDMS (polydimethylsiloxane) membrane, between two PMMA (poly(methyl methacrylate)) layers. An automated DNA extraction from 1 mu L of human whole blood can be finished on the chip in 7 minutes by sequentially aspirating NaOH, HCl, and water through the filter. The filter disc containing extracted DNA was then taken out directly for PCR. On-chip DNA purification from 0.25-1 mu L of human whole blood yielded 8.1-21.8 ng of DNA, higher than those obtained using QIAamp (R) DNA Micro kits. To realize DNA extraction from raw samples, an additional sample loading chamber containing a filter net with an 80 mu m mesh size was designed in front of the extraction chamber to accommodate sample materials. Real-world samples, including whole blood, dried blood stains on Whatman (R) 903 paper, dried blood stains on FTA(TM) cards, buccal swabs, saliva, and cigarette butts, can all be processed in the system in 8 minutes. In addition, multiplex amplification of 15 STR (short tandem repeat) loci and Sanger-based DNA sequencing of the 520 bp GJB2 gene were accomplished from the filters that contained extracted DNA from blood. To further prove the feasibility of integrating this extraction method with downstream analyses, "in situ" PCR amplifications were successfully performed in the DNA extraction chamber following DNA purification from blood and blood stains without DNA elution. Using a modified protocol to bond the PDMS and PMMA, our plastic PDMS devices withstood the PCR process without any leakage. This study represents a significant step towards the practical application of on-chip DNA extraction methods, as well as the development of fully integrated genetic analytical systems.

Squeezing-Sucking Driven Microfluidic Pcr Device Based On Microfabricated Pdms Pneumatic Valves

A Self-Priming Microfluidic Chip with Cushion Chambers for Easy Digital PCR

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Droplet-based Micro Oscillating-Flow PCR Chip

Bubble-free rapid microfluidic PCR

A Rotary Polydimethylsiloxane‐Based Device for Polymerase Chain Reaction

Droplet Based Micro Oscillating Flow-Through PCR Chip

Digital PCR on an integrated self-priming compartmentalization chip

Sub-5-Minute Ultrafast PCR using Digital Microfluidics

Digital Polymerase Chain Reaction in an Array of Femtoliter Polydimethylsiloxane Microreactors

A filter paper-based microdevice for low-cost, rapid, and automated DNA extraction and amplification from diverse sample types.

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Centrifugal Microfluidic System For Nucleic Acid Amplification And Detection

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

A nanoliter self-priming compartmentalization chip for point-of-care digital PCR analysis

DNA Amplification on a PDMS–glass Hybrid Microchip

Highly Efficient Capillary Polymerase Chain Reaction Using an Oscillation Droplet Microreactor.

A novel mechanism for user-friendly and self-activated microdroplet generation capable of programmable control.

The effect of the surface passivation on polymerase chain reaction inside a continuous flow microfluidic chip

Bubble-free on-chip continuous-flow polymerase chain reaction: concept and application

A Silicon-Based PDMS-PEG Copolymer Microfluidic Chip for Real-Time Polymerase Chain Reaction Diagnosis