Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Simulation Of 2-Dimensional Liquid-Phase Flow On A Distillation Tray

Flow pattern identification for three-phase distillation with a nonequilibrium modeling

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Development of simulation software of the number of theoretical plates in a continuous distillation column

Trial 2D Simulation of Microbubble Interaction Based on Multi-Scale Multiphase Flow Equation(Fluids Engineering)

Numerical flow visualization of a mixing layer

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

Numerical Simulation of Convective Flows in a Thin Liquid Layer at Large Reynolds Numbers

Application of a hybrid multiphase CFD approach to the simulation of gas--liquid flow at a trapezoid fixed valve for distillation trays

A k-ε turbulence model for bubbly two phase flow and prediction of liquid velocity and turbulent kinetic energy distribution

Numerical Simulations of Transverse Liquid Jet to a Supersonic Crossflow Using a Pure Two-Fluid Model

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Experiment and Simulation Using Diffusion Flux Model for Gas-Particle Two-Phase Flow in a Suspension Bed

Simulation of two-phase flow on two-dimensional corrugated sheets of structured packing

Numerical Simulation of Two-Phase Flow Using Eulerian-Eulerian Model with One-Group Interfacial Area Transport Equation

Measurement and theoretical analysis of transient liquid film during micro-channel flow boiling

2D and 3d Simulations of Fluid Dynamics in the Bubble Reactor for Liquid Fuel Synthesis: Comparisons Against Experiments

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

Liquid spreading in trickle-bed reactors: Experiments and numerical simulations using Eulerian--Eulerian two-fluid approach