Abstract:Sloshing is an interfacial-flow phenomenon which brings two challenges on how to locate the position of the interface and avoid the unphysical motion of the interface. In order to locate the the position of the interface, a new geometric Volume-of-Fluid (VOF) method called isoAdvector is adopted to pursue a sharp interface. Aiming to make the isoAdvector method compatible with the dynamic mesh adopted to handle the tank motion, the motion-flux correction is introduced, and a moving-velocity correction for face-interface intersection line (FIIL) is proposed. An approximation formula is adopted to effectively reconstruct the moving-velocity field of the meshes at each cell center based on the motion fluxes on each cell face. In order to avoid the unphysical motion of the interface due to the excessive turbulence level in the transition region at the interface, the buoyancy-modified k - omega SST model is adopted. The numerical results of wave elevations and forces are compared with the experiments. The comparisons suggest that (i) the moving-velocity correction for FIIL is important to update the volume fraction; (ii) the modified isoAdvector method can capture the the position of the interface more accurately than the algebraic VOF method; (iii) the unphysical motion of the interface can be avoided by using the buoyancy-modified k - omega SST model in long-time simulations. In addition, a new post-processing approach is proposed to evaluate the interface thickness. The decrease of interface thickness improves the accuracies of wave elevations by using the modified isoAdvector method. The adoption of both the modified isoAdvector method and the buoyancy-modified k - omega SST model improves the computational accuracies of wave elevations and hydrodynamic loads in long-time simulations.

NUMERICAL INVESTIGATION OF THE FLIP-THROUGH IN SLOSHING TANK

Numerical Study of Violent Impact Flow Using a CIP-Based Model

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Numerical simulation of water entry using CIP model

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

A Cip-Based Numerical Simulation Of Green Water On A 2-D Floating Body

A numerical method for investigating free surface impact with air entrapment during sloshing

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

Experimental and Numerical Analysis of the Fluid Flow Behavior of a Tank Corner Impacting a Water Surface

Numerical Investigation of Air Cushion Effects on Low Filling Sloshing Impacts

Experimental and numerical investigations on the liquid tank sloshing in regular waves

Numerical simulations of three-dimensional violent sloshing flows in tanks

Research on the method of constructing a numerical wave-current flume

Validation of a CIP-based Tank for Numerical Simulation of Free Surface Flows

Numerical Computations of Resonant Sloshing Using the Modified Isoadvector Method and the Buoyancy-Modified Turbulence Closure Model

Numerical Study of Droplet Splashing in a CIP?based Model

Numerical Research on Effect of Sloshing on Ship Roll Motion

NEWFLUME: a numerical water flume for two-dimensional turbulent free surface flows

A Numerical Study of a Submerged Water Jet Impinging on a Stationary Wall

Effects of Boundary Layer and Liquid Viscosity and Compressible Air on Sloshing Characteristics