Abstract:This paper presents a mathematical model developed for an electrostatically levitated micromotor in which the ring-shaped rotor is levitated by electrostatic force in five degrees of freedom (DOFs). A glass/silicon/glass sandwich structure is utilized in this electrostatic micromotor, which is based on the technology of micro-electro-mechanical systems (MEMS). In the center of ring-shaped cavity formed by ICP between the top and bottom glass plates, the rotor is levitated by the five DOFs position servo system and driven by speed control system. In this paper, the mathematical model for the motion control of the rotor in five DOFs is developed. This model describes the capacitances and electrostatic forces between the rotor and associated electrodes, and moments of two rotations about the x, y-axis. The rotational torque model governing the rotor's rotational speed is also described. In order to obtain the analytical nonlinear models for error analysis, these integral equations are expanded using the Taylor's series. Moreover the finite element model and its simulation results are obtained by using ANSYS. In terms of comparison between the simulated results and the nonlinear models, the modeling accuracy of the micromotor can be evaluated. Furthermore, the error characteristics of the linearized models via rotor displacement are analyzed. Thus, position sensing and control of both the rotor's motion, and the rotational speed, can be achieved based on these linearized models of electrostatically levitated micromotors. Copyright © 2007 by ASME.

Development of an Axial Flux Mems Bldc Micromotor with Increased Efficiency and Power Density

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Design and Fem Analysis of A High Efficiency Axial-Flux Brushless Dc Motor for Flywheel System

Design and Performance Analysis of Dual-Stator Brushless Doubly-Fed Machine with Cage-Barrier Rotor

Multi-Objective Optimization Design of a Stator Coreless Multidisc Axial Flux Permanent Magnet Motor

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Optimal Design of an Axial Flux Permanent Magnet Motor

Design of High-speed High Power Density Single-phase Permanent Magnet Brushless DC Motor Considering Control Performance

Rapid Design of Structural Parameters of Axial-flux Micro-motor Based on Deep Learning

Design and Analysis of Dual-Magnet BLDCM for Momentum Wheel

Design and Simulation of an Active Electrostatic Bearing for MEMS Micromotors

Study on Process Derivation and Characteristic Analysis for BLDC Motor Design Using Dual Rotor Structure with High Torque Density

Design and Optimization of a Slotless High-speed Permanent-Magnet Synchronous Motor with Non-magnetic Fillers in Stator

Design of Power Density Improvement by Applying Novel Shape of Slit and Notch to Outer Rib of Rotor of Spoke-type Permanent Magnet Synchronous Motor

Modeling of an electrostatic micromotor based on a levitated rotor

Novel Magnetic Field Modeling Method for a Low-Speed, High-Torque External-Rotor Permanent-Magnet Synchronous Motor

Modeling and Analysis of A Micromotor with an Electrostatically Levitated Rotor

Rotor Design and Simulation Analysis of Low-Power PERMANENT Magnet BRUShless DC Motor

Design and Analysis of a Permanent Magnet Frameless Motor

Investigation of a 3D-Magnetic Flux PMSM with High Torque Density for Electric Vehicles