Abstract:Microwave imaging technique allows obtaining images of hidden objects in structures and media using microwaves. This technique has various applications such as: nondestructive testing, medical imaging, concealed weapon detection, through-the-wall imaging, etc. Obtaining radar images in these applications is based on processing phase and amplitude of the reflected signal recorded over an aperture (a microwave hologram). Recently, systems began to appear in which the radar part is supplemented by an RGB-D sensor, which allows to obtain new capabilities. For example, there is the a microwave screening system architecture in which inverse synthetic aperture is formed by the natural motion of the subject in the vicinity of a stationary linear antenna array. The microwave system is complemented with an synchronous RGB-D video sensor which captures the trajectory of the moving subject in 3D and allows coherent processing of the radar signal. Another system detects objects buried under irregular surface and uses RGB-D sensor for capturing the surface relief for suppressing reflection of the sounding signal from the surface. Calibration between a radar and an RGB-D sensor is an essential process for microwave and optical data fusion. This article presents a novel approach for calibration, using a planar calibration target which is made of radiotransparent material (such a foam plastic sheet) with square marker and six small metal balls embedded in target surface and representing point objects. The proposed method exploits 3D-3D correspondences between coordinates of point objects in two coordinate systems associated to the sensor and to the radar. One points set is extracted from optical data, using marked corners of the target as a base points. Second points set is obtained from microwave data as local maxima of 3D volume of data reconstructed from one-frequency microwave hologram. Computer modeling were performed using Autodesk 3ds Max software by which models of all components of the system were built and the optical image from the sensor was modeled. Test experiments were carried out using a measurement system composed of the following components: a compact vector network analyzer (VNA), two mechanical scanners with stepper motors, one transmitting and one receiving horn antennas, mounted on the VNA, an RGB-D sensor, a microcontroller board, and a computer. The high accuracy of the method is confirmed both by computer modeling and physical experiment. The accuracy of determination of relative position between the radar and the sensor is about one fifth of the signal wavelength used.

On the Optimal Positioning of Antennas in the Microwave Personnel Screening System with Inverse Synthetic Aperture

A New Method for Obtaining Radar Images of Concealed Objects in Microwave Personnel Screening Systems

Experimental Setup with a Compact Vector Network Analyzer, RGB-D Sensor, and Linear Drive Modules for Imitation Modeling of Microwave Personnel Screening System in Motion

Imaging of concealed objects on moving persons by creating synthetic aperture due to their natural motion

Microwave Imaging Customized on Demand under Random Field Illumination

Determination of relative position of antenna system and RGB-D sensor in combined microwave imaging system

A Review On Recent Progress Of Portable Short-Range Noncontact Microwave Radar Systems

Fast Optimal Antenna Placement for Distributed MIMO Radar with Surveillance Performance

Microwave Imaging under Oblique Illumination

Optimal 1D MIMO Array Topology for Millimeter-Wave Short-Range Imaging

Antenna Scan Optimization for Space-Based Radar Subject to Reducing Power-Aperture Product

A Fast 220-Ghz Real Aperture 3-D Personnel Screening System with a Novel-Shaped Mirror Design

Dynamic Antenna Selection for Colocated MIMO Radar

Joint Waveform Design and Antenna Selection for MIMO Radar Beam Scanning

Generalized Optimization of Sparse Antenna Arrays for High-Resolution Automotive Radar Imaging

Optimal Configuration of Array Elements for Hybrid Distributed PA-MIMO Radar System Based on Target Detection

Optimization of Transmitter-Receiver Pairing of Spaceborne Cluster Flight Netted Radar for Area Coverage and Target Detection

An Accurate Millimeter-Wave Imaging Algorithm for Close-Range Monostatic System

Constrained optimal design of automotive radar arrays using the Weiss-Weinstein Bound

Optimal Allocation of Shared Aperture in Radar-communication Integrated System Based on Pareto Optimality

Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures