Abstract:A critical link between longitudinal strains exceeding 0.9% and TA2 edge defects was identified. Introducing the concept of "forming window" to evaluate the precision on TA2 cold roll forming control. The increasing application of TA2 titanium profiles in marine and petrochemical industries has spurred in a growing demand for diverse forms, including U‐shaped, rectangular, and tubular thin‐walled profiles. Traditional methods like mechanical subtractive processing and extrusion, despite their prevalence, suffer from high production costs and low efficiency. As a metal sheet forming technology, roll forming stands out for its efficiency, accuracy, and capability of producing complex shapes continuously. Nevertheless, the application of cold rolling to TA2 profiles is challenging primarily due to its low elastic modulus and high yield strength. In view of this, this study employed finite element simulation to analyze the stress and strain distribution during the TA2 roll forming process, aiming to have a better understanding of edge wave defect formation mechanism. Orthogonal experiments were performed to assess the influence of frame spacing, forming speed, roll gap, and downhill amount, on edge wave defects. The findings revealed a predominant influence of the downhill amount. Maintaining the downhill volume at 0.6 times the tube diameter kept the longitudinal strain below 0.9%, effectively mitigating edge wave defects. Implementation of these optimized parameters in an actual TA2 roll forming process confirmed the reliability of the simulations. This study establishes a solid foundation for advancing the TA2 tube cold roll forming process, enhancing the production efficiency of titanium profiles, and shedding some light on current energy conservation and emission reduction.

Experimental Analysis of Warping Defects in Chain-die Forming Variable-width Profiles

Analysis and suppression of flange wrinkling in AHSS chain-die forming channels with a curved axis

Springback and longitudinal bow in chain-die forming U and hat channels

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Compensate for longitudinally discrepant springback and bow in chain-die forming processes by multiple sections optimization

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Analysis of the wall thickness distortion in tube hydro-forging

Modeling for warping prediction and control in cold rotary forging of round plate

Numerical and experimental analysis of edge wave defect control during TA2 circular tube cold roll forming

Die Structure Analysis Of Stress Distribution During High-Strength Steel Stamping Process And Experimental Validation

Forming of metal channels with local features by chain-die forming

Research on the Mechanism and Processability of Roll Forming

A forming limit framework accounting for various failure mechanisms: localization, ductile and cleavage fracture

Optimization of the Forming Method on Torsion Defect in Cold-Roll Forming of Z Section Steel

An analytical model for designing defect-free sheet metal profiles with height-variable cross sections manufactured by Flexible Roller Beading

A non-sequential isothermal local-loading forming process for large-scale rib-web components

Research on the Law of Affecting the Quality of forging Metallurgy Quality on the Quality of Wedge Horizontal Rolling Mold

Effect of discrete roller dies on the contour accuracy of profiles in multi-point flexible stretch-bending forming

Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Numerical and experimental analysis of defects control in cross wedge rolling for titanium alloy workpieces