Abstract:Nanofibrillated celluloses (NFC) have attracted tremendous attention as nanofillers to improve the mechanical properties of waterborne resin. In this study, NFC was prepared by mechanical fibrillation, and then modified respectively with three different types of silane coupling agents: γ‐aminopropyltriethoxysilane (KH550), γ‐(2, 3‐epoxypropoxy) propyl trimethoxysilane (KH560), and γ‐(methacryloyloxy) propyl trimethoxysilane (KH570). The obtained NFC and modified NFCs were physically mixed with water‐based acrylic resin (WAR) to prepare films by casting method. The NFC, silanized NFC, and films were analyzed by Malvern laser particle sizer, scanning electron microscopy (SEM), Fourier transform infrared (FTIR), thermogravimetric analyzer (TGA), water contact angle (WCA), rotational rheometer, and power stretchers, respectively. Results showed that NFCs were successfully prepared and modified. The KH570 modified NFC had a slightly smaller particle size, higher absolute Zeta potential and yield stress values, good thermal stability, and exhibited better dispersion and suspension stability in solution. However, the NFC modified by KH560 had the best improvement effect on the mechanical properties and hydrophobicity of WAR membranes. Adding only 0.3 wt% KH560 modified NFC could increase the tensile strength of WAR film by 131.9%, and the WCA of the film could be increased from 85.2° to 101.6°, which makes this study beneficial for promoting the application of nanofibrillated cellulose in WAR.

Cellulosic-Absorbent Preparation With Microwave Irradiation And Its Performances

PREPARATION OF HIGH WATER-ABSORBENT RESIN WITH CELLULOSE UNDER MICROWAVE RADIATION AND ITS PERFORMANCES

Preparation of Super Absorbent P(AA-AM) Resin under Microwave Irradiation

Microwave Irradiation Copolymerization of Superabsorbents from Cornstarch and Sodium Acrylate

SUPER ABSORBENT RESIN SYNTHESIZE PROCESS BY MICROWAVE RADIATION AND ITS PERFORMANCE

Application Of Microwave Energy In Synthesis Of Superabsorbent

Preparation of poly(sodium acrylate-co-acrylamide) superabsorbent copolymer via alkaline hydrolysis of acrylamide using microwave irradiation

Study on Water Retaining Agent of Carboxymethyl Cellulose Grafted Acrylamide/Bentonite Assisted by Microwave

Preparation of Agricultural Superabsorbent Resin by Wheat Straw

Synthesis and Properties of Acrylic-Based Superabsorbents with Enhanced Crosslinking on Particle Surface

Preparation and Characterization of Poly(acrylic Acid-Co-acrylamide)/hydrotalcite Nanocomposite Superabsorbent

A Study on the Grafting Modified Water-Absorbent Resin by Microwave Irradiation and Its Blending

Study on Synthesis and Properties of Straw Cellulose Grafted with AA/AM High Absorbent Resin

Preparation of Cellulose-Graft Water Retaining Agent: Effect of Reaction Temperature and Initiator

Synthesis and characterization of reinforced acrylic-based superabsorbents crosslinked with divinylbenzene

Silane modification of nanofibrillated cellulose and its effect on the properties of waterborne acrylic resin

Preparation of a clay based superabsorbent polymer composite of copolymer poly(acrylate-co-acrylamide) with bentonite via microwave radiation

Microwave irradiation synthesis of a new kind of adsorbent for heavy metal ions and study of its adsorptive performance

Microwave initiated synthesis and application of polyacrylic acid grafted carboxymethyl cellulose

An efficient preparation method for superabsorbent polymers

Characterization of antibiotic mycelial residue (AMR) dewatering performance with microwave treatment.