Abstract:We studied the mechanical response and failure of composite cylindrical shell with pyramidal truss cores under axial compression. We developed interlocking method and a hot press method to manufacture lightweight carbon fiber composite cylindrical shell with pyramidal truss constructions. For interlocking method, Firstly, longitudinal and transverse ribs will be mass produced by 7075 aluminum using wire cutting method. Both Longitudinal and transverse ribs will be assembled together to form core materials using interlocking method. Carbon fiber composite curved face sheets (170) for both outer and inner skins of cylindrical shells will be made by hot press method in the curved steel mould. The outer skin of cylindrical shell will be assembled with curved aluminium pyramidal truss cores using J 242-A adhesive bonding, and then, the inner skin of shell will be built from two parts. For hot press method, Single walled cylindrical shells with pyramidal truss cores were made by hot press method firstly and then sandwich-walled cylindrical shells were fabricated by attaching inner carbon fiber-reinforced composite facesheets. In the analytical part of the study, The possible failure modes in axial compression of a composite cylindrical shell with pyramidal truss cores are illustrated in the following: (i) Euler buckling (EB), (ii) Overall buckling (OB), (iii) Local buckling between reinforcements (CB) and (iv) face crushing (CC). The collapse of the cylindrical shell is generally dictated by one of the competing mechanisms that depend on the geometry of the shell and the mechanical properties of the face and core materials. Four different failure modes were considered and theoretical models were presented to estimate the collapse strength associated with each failure mode. In the experimental part of the work, we used the analytical estimates to fabricate sandwich cylindrical shell that would allow probing the several different failure regimes. The measured collapse loads were in reasonable agreement with the analytical predictions.

Performance Of Composite Cylindrical Shells Under Axial Compression Loads

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Effect of Penetrated Crack on Compressive Buckling Performance of Composite Cylindrical Shells with an Open Hole

Experimental and numerical buckling analysis of carbon fiber composite cylindrical shells under external pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Experimental and Numerical Analyses on Buckling and Strength Failure of Composite Cylindrical Shells under Hydrostatic Pressure

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Compressive properties analysis of composite cylindrical shells

Compressive Test of Braided Stiffened Carbon/Epoxy Composite Cylindrical Shell

Fabrication And Axial Compressive Behavior Of Composite Sandwich Cylindrical Shells With Pyramidal Lattice Truss

Buckling and Post-Buckling Behavior of Perfect/Perforated Composite Cylindrical Shells under Hydrostatic Pressure

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions

Failure behavior of laminated composite cylindrical shells under axial impact loading

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Buckling and Stress-Competitive Failure Analyses of Composite Laminated Cylindrical Shell under Axial Compression and Torsional Loads

Buckling performance of stiffened polymer composite cylindrical shell

Buckling analyses of thin-walled cylindrical shells subjected to multi-region localized axial compression: Experimental and numerical study