Abstract:This paper proposes an algorithm for robotic kinematic calibration based on a minimal product of exponentials (POE)-based model for the applications where only position measurements are required. Both joint zero-offset errors and initial frame twist error can be involved in this model. Analysis of the identifiability of these errors shows that at most six elements of these parameters can be identified. It also suggests that at least three noncollinear points on the end-effector should be measured to maximize the identifiability. Compared with the traditional POE-based model with full pose (position and orientation) measurements, the minimal model with only position measurements outperforms in terms of convenience, efficiency, and accuracy.Note to Practitioners-Kinematic calibration is pivotal to improve the position accuracy of a robot. To avoid the disadvantages of measuring the orientation of the end-effector during calibration, an algorithm using only position measurements is presented, with which one needs only position measurements of several points fixed on the end-effector without orientation information during the whole calibration process. This will greatly facilitate the scheme design as well as the practical operations. The identifiability of the parameters is then analyzed with two conclusions: 1) at most six elements of the joint zero-offsets and the initial frame twist in total can be identified simultaneously and 2) at least three points on the end-effector which are not collinear should be measured so as to make the identifiability maximum. According to these conclusions, one should carefully select parameters to formulate the error model and measure sufficient points on the end-effector during the calibration procedure.

A Novel Kinematics Calibration Model For The Reptiles-Like Quadruped Robot

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

Quadruped Robot Calf Joint Actuator Molding and Design Based on Dynamic Similarity Hypothesis

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

Learning Accurate and Robust Velocity Tracking for Quadrupedal Robots

Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

An Automatic High-Precision Calibration Method of Legs and Feet for Quadruped Robots Using Machine Vision and Artificial Neural Networks

An Online Intelligent Kinematic Calibration Method for Quadruped Robots Based on Machine Vision and Deep Learning

An Efficient Kinematic Calibration Method for Parallel Robots With Compact Multi-Degrees-of-Freedom Joint Models

Whole-body kinematic and dynamic modeling for quadruped robot under different gaits and mechanism topologies

The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Adaptive Robust Invariant Extended Kalman filtering for Biped Robot.

A Kinematic Calibration Method for Robots Based on the PGTF Error Model and Levenberg-Marquardt Algorithm

Efficient Kinematic Calibration for Articulated Robot Based on Unit Dual Quaternion

POE-Based Robot Kinematic Calibration Using Axis Configuration Space and the Adjoint Error Model

A Minimal POE-Based Model for Robotic Kinematic Calibration with Only Position Measurements

Model-based kinematic and non-kinematic calibration of a 7R 6-DOF robot with non-spherical wrist

A minimal kinematic model for serial robot calibration using POE formula

Efficient Model-Free Calibration of a 5-Degree of Freedom Hybrid Robot