Abstract:Poly(lactic-co-glycolic acid) (PLGA) is a widely used polymeric biomaterial due to its excellent biocompatibility and biodegradation. Asymmetric PLGA hollow fiber membranes (HFMs) have been extensively used as porous tubular scaffolds for tissue engineering, e.g. for nerve conduits and artificial blood vessels. PLGA HFMs are generally fabricated through a dry-jet wet spinning process, and the porous morphology of PLGA HFMs induced by polymer/solvent/nonsolvent ternary phase inversion plays a key role in their biomedical performance. In this study, PLGA was dissolved in dimethyl sulfoxide (DMSO) as the dope fluid, and deionized water with different DMSO contents was used as the bore fluid. The influence of bore fluid composition on the HFM morphology and performance was investigated by measuring phase separation time, porosity, mechanical properties, and in vitro hydrolytic degradation. The results indicated that with increased bore fluid DMSO content, the inner and outer diameters, as well as the wall thickness of the HFMs, decreased significantly; also, the inner surface became more porous and the inner surface pore size and porosity increased. Cross-sectional SEM images showed that the middle layer of the five-layered microstructure gradually changed from large voids to finger-like microvoids when the DMSO content in bore fluid increased from 0% to 60%. Furthermore, the HFMs resulting from higher DMSO content in bore fluid had a lower porosity, a faster degradation rate, a higher Young's modulus, and a lower suture retention strength. More importantly, the in vitro cell culture on the inner surface of PLGA HFMs showed that PC12 cells cultured on HFMs prepared with 60% DMSO bore fluid exhibited better cell adhesion, longer neurite length, and alignment along the HFM longitudinal axis. A ternary phase diagram and the Flory-Huggins theory were applied to analyze HFM morphological formation. The study contributes to understanding of the mechanism of HFM porous morphology formation and should guide potential application of PLGA HFMs as tissue engineering scaffolds.

Preparation And Properties Research Of Poly(Lactide-Co-Glycolide)/Silk Blend Nanofibrous Membrane

Development of the Silk Fibroin Blend Membranes

Preparation of Silk Fibroin-Chitosan Blend Membrane and its Property Mensuration

Physical Properties and Cell Compatibility of Silk Fibroin-chitosan Blend Membranes

Fabrication and characterization of porous tubular silk fibroin scaffolds.

Fabrication of A Novel Blended Membrane with Chitosan and Silk Microfibers for Wound Healing: Characterization, in Vitro and in Vivo Studies

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Preparation and evaluation of electrospun PLGA/SEP fiber membrane

Porous Morphology and Mechanical Properties of Poly(lactide-Co-glycolide) Hollow Fiber Membranes Governed by Ternary-Phase Inversion

Effect Of Fiber Structure On The Properties Of The Electrospun Hybrid Membranes Composed Of Poly(E-Caprolactone) And Gelatin

Preparation and Characterization of Ibuprofen-Loaded Poly(Lactide-Co-Glycolide)/Poly(Ethylene Glycol)-G-Chitosan Electrospun Membranes

Effect of Bore Fluid Composition on Poly(lactic-Co-glycolic Acid) Hollow Fiber Membranes Fabricated by Dry-Jet Wet Spinning

Analysis of the Comprehensive Tensile Relationship in Electrospun Silk Fibroin/Polycaprolactone Nanofiber Membranes

Preparation and Properties of Electrospun Soy Protein Isolate/Polyethylene Oxide Nanofiber Membranes

Preparation and characterization of solvent-free fluids reinforced and plasticized polylactic acid fibrous membrane

Preparation and Characterization of Transparent Silk Fibroin/cellulose Blend Films

Multifunctional silk fibroin – Poly(L-lactic acid) porous nanofibers: Designing adjustable nanopores to control composite properties and biological responses

Poly (lactic acid) electrospun nanofiber membranes: Advanced characterization for biomedical applications with drug loading performance studies

Preparation and characterization of a PFSA–PVDF blend nanofiber membrane and its preliminary application investigation

Electrospun Aligned PLLA/PCL/functionalised Multiwalled Carbon Nanotube Composite Fibrous Membranes and Their Bio/mechanical Properties

Preparation and characterization of crosslinked electrospun pullulan nanofiber membrane as a potential for biomaterials