Abstract:<p>The paper presents the numerical investigations for a light civil helicopter fuselage with the purpose of reducing the helicopter drag. Two numerical methods: Reynolds-Averaged Navier-Stokes (RANS) and a hybrid RANS-LES method: improved delayed detached-eddy simulation (IDDES) method are performed for the simulation of a prototype helicopter fuselage. The RANS method is validated by a modular helicopter fuselage with experimental data, while the IDDES method has already been used in other studies and good results have been achieved. The numerical results of the civil helicopter in terms of the aerodynamic coefficients obtained by the two methods are consistent with each other. Compared to the RANS method, the IDDES approach is capable of predicting the large separation flow of the fuselage/components and the small-scale vortices in the flow field. It is found that the hybrid method captures the periodically detached separating vortices behind the skid struts, while the flow at the same position simulated by the RANS method is still attached. Moreover, separating vortices, which develop diagonally upwards, are captured at fuselage/tail-boom junction by the hybrid method, whereas RANS simulation doesn't predict. Subsequently, the design of the helicopter drag reduction is carried out at <span class="math"><math>α=0</math></span> deg angle of attack and 0.2 Mach number through shape optimization based on the numerical simulations, and the numerical results are verified by the force tests. It shows that the optimization of the landing skids aims at reducing the strong Karman vortex shedding effect induced by the skids, which greatly decreases the total drag. Combined with the optimization of the fuselage/tail-boom transition, this approach suppresses the separation flow of the fuselage and reduces the pressure drag, and the adjustment of transition slope benefits of up to 1.18% drag reduction, while the extension of transition reduces the drag by 2.64%. The optimization of tail-boom layout demonstrates that lower tail-boom layout can contribute to a drag reduction by 4.37% (RANS) and 3.89% (test), respectively, when compared to the original tail-boom layout.</p>

The Concave Front And Side Panels: A Case Study Of Low Drag Cab Styling For A Heavy Truck

Improving aerodynamic characteristics for drag reduction of heavy truck

Study of the automotive aerodynamic performance affected by entrance structure of forecabin

Aerodynamic Drag Reduction of a Light Truck - from Conceptual Design to Full Scale Road Tests

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind

Wheel Housing Aerodynamics on Heavy Trucks

Extended Study of Full-Scale Wind Tunnel Test and Simulation Analysis Based on DrivAer Model

A Method for Truck Underbody Aerodynamic Investigation

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

City Car Drag Reduction by Means of Shape Optimization and Add-On Devices

Design Optimization of LCV CAB for Frontal Pendulum Test: Enhancing Survival Space Improvement Through Frugal Load Path Transfer Techniques

Numerical Drag Reduction of a Ground Vehicle by NACA2415 Airfoil Structured Vortex Generator and Spoiler

A Study on Aerodynamic Drag of a Semi-trailer Truck

Comparison of CFD methods with air drag test values for commercial vehicles

A New Circular Section Control for Streamwise Profiles in Aeroengine Nacelle Cowl Design and Optimization

Lightweight Design of Commercial Vehicle Cab Based on Fatigue Durability

On the Drag Reduction Optimization of the DrivAer Fastback Model Car with Digital Side Mirror

Numerical investigations on drag reduction of a civil light helicopter fuselage

Heavy Truck Drag Reduction Obtained from Devices Installed on the Trailer

Introduction of a New Car Model Series for Aerodynamics Research

An adaptive multi-objective optimization method for structure-connection-performance design of commercial vehicle cab