Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Subgrid Eddy Diffusivity For Scalar Turbulence

Large eddy simulation of scalar turbulence using a new subgrid eddy diffusivity model

Dependence of Turbulent Scalar Flux on Molecular Prandtl Number

A New Subgrid Eddy-Viscosity Model for Large-Eddy Simulation of Anisotropic Turbulence

TRANSPORTATION PROPERTIES OF SCALAR TURBULENCE AT DIFFERENT MOLECULAR PRANDTL NUMBERS

A New Subgrid Eddy Viscosity Model and Its Application

New Subgrid Model For Large Eddy Simulation

Subgrid modeling of anisotropic rotating homogeneous turbulence

Dynamic Nonlocal Passive Scalar Subgrid-Scale Turbulence Modeling

Subgrid-scale model for large-eddy simulation of transition and turbulence in compressible flows

A new dynamic subgrid eddy viscosity model with application to turbulent channel flow

Eddy diffusivities in scalar transport

A Model for Eddy Conductivity and Turbulent Prandtl Number

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

A subgrid eddy viscosity model for large eddy simulation of anisotropy turbulence

Anisotropic Subgrid-Scale Modelling: Comparison of LES with High Resolution DNS and Statistical Theory for Rapidly Rotating Turbulence

Turbulent Prandtl number effect on passive scalar advection

ON SUB-GRID SCALE TURBULENCE CHARACTERISTICS

Data-driven algebraic models of the turbulent Prandtl number for buoyancy-affected flow near a vertical surface

Countergradient turbulent transport in a plume with a crossflow

Prandtl number effects on passive scalars in turbulent pipe flow