Abstract:<p>Nowadays, great attention has been arisen on steel-plate composite (SC) walls, but studies on SC wall-to-foundation connections were rarely reported. In this paper, eight large-scale specimens were designed and tested to investigate the in-plane and out-of-plane behavior of SC wall-to-foundation connections subjected to combined axial compression and cyclic lateral-force. Test parameters mainly included the loading direction (in-plane and out-of-plane), construction detail of the connection (lap-splice and embedding) and the aspect ratios or height-to-thickness ratios of SC walls. The effects of test parameters on SC wall-to-foundation connection performance were discussed. For test specimens subjected to in-plane loading, results showed that the specimens all failed by flexure. For specimens subjected to out-of-plane loading, the specimens with the wall height-to-thickness ratio of 1.33 and 2.5 failed by shear and flexure-splitting, respectively. The lap-splice connection could be regarded as an over-strength connection since failure usually occurs on the connection while the embedding connection could be designed as a full-strength connection where the SC wall itself fails, according to AISC N690s1-15. The lap-splice connections had better ductility than embedding connections. The specimens with larger SC-wall aspect ratios or height-to-thickness ratios had better ductility. The current expressions for the in-plane and out-of-plane load-carrying capacities of SC walls were evaluated based on the test results. The comparison showed that the current expressions generally underestimated the load-carrying capacities of the specimens. Since both construction details of lap-splice and embedding had been proven feasible for practical use in SC wall-to-foundation connections, further studies on the design of both connection types were recommended.</p>

Experimental Study on the Connection Property of Full-Scale Composite Member

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Research on the Connection Property of Bonded Steel Sleeve Connection for Full-scale Composite Member

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Analysis and experiment on connection strength between the composite panel and titanium joint

Experimental investigation on flexural performance of splicing glass fiber-reinforced polymer (GFRP)-Concrete-steel sandwich composite members

Experimental investigation of failure modes and ultimate strength of GFRP structure members under longitudinal compression

Experimental and numerical investigation on the column-beam connection in the corrugated steel plate-concrete composite frame

Axial Compressive Strength Experimental and Numerical Studies of Full-Scale Specimens Simulating GFRP Composite Bushing Column

Experimental Study on the Mechanical Properties of E-glass Fiber/Epoxy Composite Material

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Experimental and Numerical Study of Curved SFRC and ECC composite beams with Various Connectors

Stress analysis for composite connections with medium-high strength steel under reciprocal load

An investigation of Fatigue Behavior and Residual Strength Model of Steel-GFRP Composite Bar

Experimental and Theoretical Study on the Fatigue Crack Propagation in Stud Shear Connectors

Experimental study on steel-plate composite wall-to-foundation connections subjected to combined axial compression and cyclic lateral-force

EXPERIMENTAL STUDY ON BUCKLING RESISTANCE TECHNIQUE OF STEEL MEMBERS STRENGTHENED USING FRP

Experimental Study on Steel Jacket–Concrete Composite Connections

Interfacial Behavior and Debonding Failures of Full-Scale CFRP-strengthened H-section Steel Beams

EXPERIMENTAL AND THEORETICAL ANALYSIS ON FLEXURAL BEHAVIOR OF STEEL PLATE-GFRP COMPOSITE BRIDGE DECK