Abstract:<p>Cables and hangers are critical components of long‐span bridges, tension forces of them are needed to be accurately measured for ensuring the safety of bridges. Traditionally, cable tension forces are measured by attached accelerometers or elastomagnetic (EM) sensors, however, applying these sensors into engineering practice are time‐consuming, labor‐intensive, and highly dangerous. To address these problems, an unmanned aerial vehicle (UAV)‐based noncontact cable force estimation method with computer vision technologies was proposed in this article. Basic concept of the proposed method is to use the UAV‐installed camera for capturing vibration images of cables from a certain distance and cable dynamic properties are extracted by analyzing captured images. It includes two aspects: (a) a line segments detector (LSD) was employed for detecting cable edges from captured video and a line matching algorithm was further proposed for extracting dynamic displacements; (b) the frequency difference of adjacent higher modal frequencies identified from relative displacements of the cable was employed for cable force calculation to avoid the difficulty of extracting fundamental frequency from UAV‐captured video. It should be noted that relative displacement herein refers to the difference between displacements of two points on the same cable. Advantages of the proposed method lie in that the proposed LSD and matching algorithm are more robust than traditional correlation‐based algorithm for calculating dynamic displacements of bridge cables and it does not need to adjust predefined parameters (i.e., subset size in correlation‐based algorithms). In addition, the combination of relative displacement and frequency difference‐based cable force estimation has the capability of enhancing the Fourier spectrum magnitude of bridge cables and reducing the effect of UAV motion on extraction of cable vibration frequencies. The effectiveness and robustness of the proposed method was verified by using an experimental inclined cable and field‐testing data of a long‐span suspension bridge. Results show that calculated cable forces with UAV technology have a good agreement with reference values measured by attached accelerometers and fixed camera, demonstrating correctness and robustness of the proposed method for cable force estimation.</p>

Feasibility Study for Vision-Based Cable Force Measurement Using Smartphone

Portable and Convenient Cable Force Measurement Using Smartphone

Smartphone-Based Mobile Testing Technique for Quick Bridge Cable–Force Measurement

Fast Force Estimation of Cable Structures Using Smartphone-Captured Video and Template Matching Algorithm

Cable Force Monitoring System of Cable Stayed Bridges Using Accelerometers Inside Mobile Smart Phone

Experimental verification and rapid estimation of uncalibrated cable force via video-based and vibration-based measurements

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Application of Wireless Cable Force Measurement System of Cable Structures

Fast and robust vision-based cable force monitoring method free from environmental disturbances

Experimental Research on Quick Structural Health Monitoring Technique for Bridges Using Smartphone

Development of Elasto-Magneto-Electric (eme) Sensor for In-Service Cable Force Monitoring

Public-participant Quick Cable Force Investigation Method Using Smartphone for Bridges in Disaster Area

Vision-Based Cable Displacement Measurement Using Side View Video

Noncontact cable force estimation with unmanned aerial vehicle and computer vision

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Dynamic Response Measurement and Cable Tension Estimation Using an Unmanned Aerial Vehicle

Smart wireless tension force monitoring system for stay cables

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Cable force estimation of a long‐span cable‐stayed bridge with microwave interferometric radar

Rapid measurement method for cable tension of cable‐stayed bridges using terrestrial laser scanning

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements