Abstract:Purpose: The objective of this study was to evaluate the anterior tooth movement without and with bonded fixed orthodontic retainers under incremental loading conditions. Materials and methods: Six extracted mandibular anterior human teeth were embedded in acrylic resin in True Form I Arch type and 3D reconstruction of Digital Volume Tomography (DVT) images (0.4 mm3 voxels) were obtained. The anatomy of each tooth was segmented and digitally reconstructed using 3D visualization software for medical images (AMIRA, FEI SVG). The digital models of the teeth were repositioned to form an arch with constant curvature using a CAD software (Rhinoceros) and a base holder was designed fitting the shape of the roots. The clearance between the roots and their slot in the holder was kept constant at 0.3 mm to replicate the periodontal ligament thickness. The holder and the teeth were then manufactured by 3D printing (Objet Eden 260VS, Stratasys) using a resin material for dental applications (E = 2-3 GPa). The 3D-printed teeth models were then positioned in the holder and the root compartments were filled with silicone. The procedure was repeated to obtain three identical arch models. Each model was tested for tooth mobility by applying force increasing from 5 to 30 N with 5 N increments applied perpendicular on the lingual tooth surface on the incisal one third (crosshead speed: 0.1 mm/s). The teeth on each model were first tested without retainer (control) and subsequently with the bonded retainers (braided bonded retainer wire; Multi-strand 1 × 3 high performance wire, 0.022″ × 0.016″). Tooth displacement was measured in terms of complicance (F/Δ movement) (N/mm) using custom-built optoelectronic motion tracking device (OPTIS) (accuracy: 5 µm; sampling rate: 200 Hz). The position of the object was detected through three LEDs positioned in a fixed triangular shape on a metal support (Triangular Target Frame). The measurements were repeated for three times for each tooth. Data were analyzed using mixed model with nesting (alpha = 0.05). Results: The use of retainer showed a significant effect on tooth mobility (0.008 ± 0.004) compared to non-bonded teeth (control) (0.014 ± 0.009) (p < 0.0001). The amount of displacement on the tooth basis was also significantly different (p = 0.0381) being the most for tooth no. 42 (without: 0.024 ± 0.01; with: 0.012 ± 0.002) (p = 0.0018). No significant difference was observed between repeated measurements (p = 0.097) and the incremental magnitude of loading (5-30 N: 0.07 ± 0.01-0.09 ± 0.02) (p > 0.05). Conclusion: Mandibular anterior teeth showed less tooth mobility when bonded with stainless steel wire as opposed to non-bonded teeth but the tooth mobility varied depending on the tooth type. Intermittent increase in loading from 5 to 30 N did not increase tooth displacement.

A Novel Set Of Individualized Attachments For Impacted Tooth Traction Based On 3d Simulation And Printing Technology: Design And Fabrication

Clinical application of CAD/CAM technology in 3D printed dental model used for removable splints fabrication in the treatment of traumatized anterior permanent teeth in children

Three-dimensional finite element analysis of upper anterior teeth retraction and intrusion using clear aligners and mini-implants

Three-dimensional finite element analysis on canine teeth distalization by different accessories of bracket-free invisible orthodontics technology

Three-dimensional Evaluation of Maxillary Tooth Movement in Extraction Patients with Three Different Miniscrew Anchorage Systems: a Randomized Controlled Trial

Numerical simulation on the biomechanical interactions of tooth/implant-supported system under various occlusal forces with rigid/non-rigid connections

Digital Orthodontic Extrusion System for Complex Crown-Root Fracture of Anterior Teeth: A Technique Report.

Morphological and Three-Dimensional Analysis for the Clinical Reproduction of Orthodontic Attachments: A Preliminary Study

Comparative Static Force Analysis of Molar Distalization by A Novel Sliding Rod Microscrew Implantation Jig and Direct Traction

A Digital Technique to Fabricate Segmental Individual Tooth Trays for Making an Impression of Multiple Crown Preparations.

Modeling, simulation, and experimental study of personalized porous tooth structure formed by laser selective melting (SLM)

The Use of CAD/CAM Technology in Mandibular Canine Disimpaction: A Case Report

A Digitally Designed and 3D Printed Individual Tooth Tray for Taking Subgingival Impression of Complete Crown Preparation

Clinical effectiveness of orthodontic miniscrew implantation guided by a novel cone beam CT image-based computer aided design and computer aided manufacturing (CAD-CAM) template

Displacement of teeth without and with bonded fixed orthodontic retainers: 3D analysis using triangular target frames and optoelectronic motion tracking device

Assessment of labially impacted canines traction mode with clear aligners vs. fixed appliance: A comparative study based on 3D finite element analysis

3D-Printed One-piece Versus Two-piece Orthodontic Clear Aligner Attachments Bonded with Provisional Crowns: A Proof of Concept

Automated Placement of Dental Attachments Based on Orthodontic Pathways

Influence of Connector Design on Displacement and Micromotion in Tooth-Implant Fixed Partial Dentures Using Different Lengths and Diameters: A Three-Dimensional Finite Element Study

Evaluation and comparison of three-dimensional finite element analysis of stress distribution in immediately placed and loaded conventional and customized three-dimensional printed dental implants

A Novel Conceptual Design of a Biomimetic Oral Implant and Its Biomechanical Effect on the Repairment of a Large Mandibular Defect