Abstract:Furfural (C5H4O2) 5 H 4 O 2 ) is a high-value platform chemical that is traditionally derived from the solvolysis of hemicellulose. However, its production from pyrolysis is far from satisfactory. In particular, the abundant cellulose within lignocellulosic biomass has yet to be successfully upgraded into furfural. Consequently, the overall yield of furfural from a lignocellulosic biomass is extremely low. Herein, we report a facile heterogeneous catalyst prepared from a simple impregnation of palladium (Pd) onto MCM-41 mesoporous silica. The catalyst demonstrated a remarkably high selectivity of 58.5% and yield of 32.5 wt% for furfural from the fast pyrolysis of wet cellulose. It was also confirmed to reach a selectivity of 65.4% and yield of 44.5 wt% for furfural from wet xylan, as well as a furfural yield of 23.9 wt% from wet sugarcane bagasse. All these values are superior to the literature reports. Through advanced characterisation including in-situ synchrotron high-temperature XRD and DRIFTS measurement, the loading of Pd in a tiny quantity of 1 mol% was confirmed to be sufficient in enhancing the surface hydrophilicity of the MCM-41 support, promoting the adsorption of reactants especially the formaldehyde group (HCHO), as well as the desorption of the target product furfural. In addition, Pd oxide (i.e., Pd2+O) 2 + O) was confirmed to be the catalytic active site. However, it was partly reduced into metallic Pd0 0 during the cellulose pyrolysis, due to the preferred reduction by adsorbed formaldehyde group and other reductants including H2 2 and CO in the vicinity of the PdO sites on the Pd-O-Si interface. Nevertheless, the catalyst was proven to retain the memory of its initial state after combustive regeneration in air, having oxidation state of Pd, particle size, and dispersion degree being reversed to its original construction. Accordingly, its activity remained stable upon cyclic testing. All these results demonstrate a high practical viability of this heterogenous catalyst for the valorisation of cellulose-rich biomass, an otherwise abundant crop waste across the world.

Catalytic Conversion Of Xylan Into Furfural By Pervoskite-Type Oxide

One-Step heterogeneous catalytic process for the dehydration of xylan into furfural

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Furfural production from xylan using a Pueraria Residues carbon-based solid-acid catalyst

Novel Approach on Developing TiO2-Supported Heteropolyacids Catalyst for the Efficient Conversion of Xylose to Furfural

Conversion of xylose into furfural using lignosulfonic acid as catalyst in ionic liquid.

Conversion of Xylose into Furfural over MC-SnOx and NaCl Catalysts in a Biphasic System

Catalytic Conversion of Xylose and Xylan into Furfural over Cr3+/P-SBA-15 Catalyst Derived from Spent Adsorbent

Evolution of the Pd0/PdO Phase Change on Pd-MCM-41 Catalyst for Efficient Production of Furfural from the Fast Pyrolysis of Cellulose

Conversion of Xylose to Furfural Catalyzed by Carbon-Based Solid Acid Prepared from Pectin

Efficient and selective conversion of xylose to furfural over carbon-based solid acid catalyst in water-γ-valerolactone

High production of furfural by flash pyrolysis of C6 sugars and lignocellulose by Pd-PdO/ZnSO4 catalyst

Alcohol formaldehyde resin solid acid catalytic conversion of biomass into furan compounds

Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone

Dehydration of Xylose and Xylan to Furfural Using P‐Zr‐SBA‐15 Catalyst in Aqueous or Biphasic System

Efficient one-pot transformation of furfural to pentanediol over Cu-modified cobalt-based catalysts

One-pot Catalytic Conversion of Carbohydrates into Furfural and 5-Hydroxymethylfurfural

Direct Conversion of Wheat Straw Components into Furan Compounds Using a Highly Efficient and Reusable SnCl2-PTA/β Zeolite Catalyst

Efficient conversion of carbohydrates and biomass into furan compounds by chitin/Ag co-modified H<sub>3</sub>PW<sub>12</sub>O<sub>40</sub> catalysts

Efficient Conversion of Xylose and Corncob to Furfural Using a Novel Carbon-Based Solid Acid Derived from Black Liquor Lignin-Tin Complexes

Catalytic Pyrolysis of Cellulose with Sulfated Metal Oxides: A Promising Method for Obtaining High Yield of Light Furan Compounds