Study Of Hydroxypropylmethyl Cellulose Surface Activity At The Air-Water And Solid-Water Interfaces

Qing-Yong Li,Jun Ye,Jian Xiong

2012-01-01

Abstract:This work was designed to investigate the surface activity of Hydroxypropyl Methyl Cellulose (HPMC) at air-water and solid-water interface in different pH and concentration, because the surface activity of HPMC is a prerequisite to the understanding many processes of industrial relevance such as dispersion, wettability which spans from food and pharmaceutical applications. Experiments were performed at constant temperature (30 degrees C), which was controlled by water circulating in thermostat. The surface tension and contact angle were measured for HPMC by using a tensiometer (DataPhysics DCAT21), at pH ranging from 3 to 8 and bulk concentrations (C-HPMC) ranging from 0.1%wt to 1.0%wt. The results showed that surface pressure decreased with pH increasing when the concentration (C-HPMC) was 0.1%wt. And the curves showed "Lambda" shapes with pH increasing for concentration (C-HPMC) of 0.3%-1.0%wt. At pH <= 5, the HPMC aqueous solutions surface pressure with concentration (C-HPMC) increasing also showed "Lambda" shapes. But at pH >= 6, it increased with the concentration (C-HPMC) increasing. The contact angles of HPMC powder were all less than but close to 90 degrees C, which indicated that the HPMC could be wetted but was hydrophobic. At pH 4, the contact angle was the minimum values. Therefore, we considered that pH and concentration had a synergistic effect on surface pressure and the wettability of HPMC powder exhibited sensitivity of pH.