Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Configuration Modeling And Interior Force Analysis Of Deployable Tensegrity

Structural Analysis for Deployable Space Truss with Twist Springs Activated

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

Space Masts Constructed from Octahedral Truss Units and Their Derivatives

Structural Design and Static Analysis of a Double-Ring Deployable Truss for Mesh Antennas

Study and application of tensegrity torus

The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Deployment Dynamic Analysis of Circular Truss Deployable Antenna with Friction

Automatic construction of tensegrity structures with complex surfaces based on circle packing

Dynamic Analysis and Test Research of Double-Ring Deployable Truss Structure

Dynamics Analysis of Mechanisms with Elastic Bars and Three-Dimensional Clearance Revolute Joints

Multi-Stable Tensegrity Structures

Research on a New Class of Planar Tensegrity Trusses Consisting of Repetitive Units

Optimal displacement control of tensegrity structures based on linear programming

A New Tensegrity Module — “Torus”

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

Form-Finding of Tensegrity Structures with Boundary Constraints Using Parallel Computation of Singular Value Decomposition

Automatic Assembly of Tensegrity Chain Structures along Axes Based on NURBS Curves

Minimal Mass Design of Active Tensegrity Structures

Research and Analysis on Dynamic Properties of Spatial Rod-cable Deployable Structure