Abstract:Bilge keels are effective passive devices in mitigating the rolling motion, and the usage of them covers almost all the sea going vessels. This paper focuses on the viscous effect of the bilge keel, ignored the effect of the free surface and the effect of the ship hull, for the general viscous characteristic of the bilge keel. In order to investigate the viscous effect of the bilge keel on the total damping moment, a special 2 dimensional numerical model, which includes a submerged cylinder with and without bilge keels, is designed for the simulation of forced rolling. Three important factors such as bilge keels width, rolling periods, as well as maximal rolling angles are taken into account, and the viscous flow field around the cylinder is simulated by some codes based on the viscous method in different conditions, in which the three factors are coupled. Verification and validation based on the ITTC method are performed for the cylinder without bilge keels in the conditions of different rolling periods and maximal rolling angles. The primary calculation of damping moment induced by the cylinder with 0mm, 4mm, and 10mm width bilge keels shows some interesting results, and a systematic analysis is conducted. The analysis of the damping moment components suggests there is phase difference between the damping moment induced by the cylinder and the bilge keels, and when the bilge keels width reaches a special size, the total damping moment is mitigated. The calculation of the damping moments induced by the cylinder with some larger bilge keels are also performed, and the results suggest that, the damping moment induced by the bilge keels is increased rapidly and becomes the dominant part in the total damping moment while the width of the bilge keels are increased, but the damping moment induced by the cylinder is not changed significantly. Some illustration of the vortices formation and shedding is included, which is the mechanism of the damping moment caused by the bilge keels. The present work shows an interesting problem, and it is useful for the bilge keel design.

Study On Ship Roll Damping

Numerical Simulation of Ship Roll and Bilge Keel Damping Calculation

Damping Prediction of a Rolling Ship with Bilge Keel in Viscous Flow Based on Numerical Simulation

Influence of Bilge-Keel Configuration on Ship Roll Damping and Roll Response in Waves

Numerical Analysis Of Bilge Keels Effects On The Rolling Motion Of A Ship

Numerical and experimental study on nonlinear roll damping characteristics of trimaran vessel

Non-Parametric Identification of Nonlinear Damping and Restoring Forces for Ship Free Roll Decay in Numerical Tank

Numerical Research of the Viscous Effect of the Bilge Keel on the Damping Moment

Numerical Simulation of Rolling for 3-D Ship with Forward Speed and Nonlinear Damping Analysis

Investigation of the Damping Moment Induced by a Forced Rolling Cylinder with Bilge Keels

Experimental and CFD analysis of roll damping of a wind turbine installation vessel

Roll characteristics contributed by a bilge keel using a high-order fractional step finite volume solver

Numerical Analysis of Viscous Effect on Ship Rolling Motions Based on CFD

Numerical Simulation of Ship Free Roll Decay Motion in Viscous Flow

Direct Calculation Method of Roll Damping Based on Three-Dimensional CFD Approach

Experimental Investigation into the Effect of Roll Amplitude on Roll Damping

Numerical Study On Roll Damping Of Ship By Solving Incompressible N-S Equations

Computations of ship roll damping in viscous flow

Vortex Patterns and Roll Damping on Various Cross Sections of Ships

Comparative Study on Eddy Roll Damping with Experimental Results Using a High-order Fractional Step Finite Volume Solver

Numerical investigations on roll decay of a lifeboat in calm water and waves