Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Punching Capacity of A Reinforced Concrete Bridge Deck Slab Loaded to Failure

Punching/Shear Strength of a Full-scale Tested Bridge Deck Slab

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Shear Capacity of a RC Bridge Deck Slab: Comparison Between Multilevel Assessment and Field Test

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

A Multi-levelStructural Assessment Proposal for Reinforced Concrete Bridge Deck Slabs

A Multi-Level Structural Assessment Strategy for Reinforced Concrete Bridge Deck Slabs

A Multi-Level Structural Assessment Strategy for Analysis of RC Bridge Deck Slabs

Shear Assessment of a Reinforced Concrete Bridge Deck Slab According to Level‐of‐approximation Approach

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Prediction of Punching Behaviour of RC Slabs Using Continuum Non-Linear FE Analysis

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Structural Assessment of Bridge Deck Slabs

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Punching Shear Failure in Double-Layer Pultruded FRP Grid Reinforced Concrete Bridge Decks

Destructive Test Study of a Prestressed Concrete Hollow Slab Beam Bridge

RESEARCH ON PUNCHING SHEAR AND BENDING BEHAVIOR OF ULTRA-HIGH PERFORMANCE CONCRETE SLABS

Full-range Experimental Analysis of Flexural Performance of an Existing PC Hollow Slab

Flexural and Shear Tests on Reinforced Concrete Bridge Deck Slab Segments with a Textile-Reinforced Concrete Strengthening Layer

Structural Safety Evaluation of Precast, Prestressed Concrete Deck Slabs Cast Using 120-MPa High-Performance Concrete with a Reinforced Joint

Bridge load testing and damage evaluation using model updating method