Numerical Investigation into the Impact of Oxy-Fuel Combustion on the Thermochemical State and Slab Heating Behaviour Inside a Metallurgical Heating Furnace
E. Dianyu,Yifeng Yang,Lingyi Weng,Yingxin Yang,Yonggang Liu,Chao Chen,Jiaxin Cui,Lingling Liu
DOI: https://doi.org/10.1016/j.icheatmasstransfer.2024.108263
IF: 6.782
2024-01-01
International Communications in Heat and Mass Transfer
Abstract:Oxy-fuel combustion is a promising technology for the merits of energy-saving and NOx emission reduction and has been gradually promoted to the application of metallurgical heating furnaces. For the purpose of understanding and optimizing the heating process of the industrial furnace, with a particular focus on the effect of fuel types and oxy-fuel combustion, a comprehensive transient 3D CFD model was built for the simulation of the complicated in-furnace thermochemical states and the gas-solid heat transfer at multi-scales. It was observed that under constant calorific heat input conditions, the fuel composition appears to have little influence on the internal thermal state and the slab heating. Meanwhile, oxy-fuel combustion enhances the in-furnace heat radiation intensity, leading to higher average gas and thus higher slab temperatures. However, the in-furnace thermal distribution becomes uneven and the slab internal temperature difference increases. Under the prerequisite that the slab temperature leaving the furnace is between 1373 and 1573 K and the maximum internal temperature difference is less than 50 K/m, the production efficiency can be increased by 6.25 % when oxy-fuel combustion is applied, with the corresponding slab residence time decreases from 7424 s to 6960 s.