Abstract:Industries largely rely on empirical tests to determine what composition and amount of TiBAl grain refiners to add during the casting of aluminum alloy for cast grain structure refinement. TiBAl grain refiners are aluminum master alloys having intermetallic particles within the aluminum matrix, these particles are mainly made of Ti and Al borides, having higher melting point than aluminum matrix. Addition of them to the melt, induces heterogeneous nucleation of aluminum cast grain structures, which promotes solidification of fine equiaxed grains at expense of columnar grain structures. This yields in grain refinement of cast structures, and is beneficial to mechanical and surface treatment properties on the final product. Very often in industrial practice during casting, whether a grain refiner is suitable for a given alloy, the amount to be added in the melt, and what cooling rates to use, are questions remain and reaching the balance becomes a cumbersome practice, and leads to pernicious material's properties. This study aims to explore the refinement efficiency of three variants of locally supplied TiBAl grain refiners on the microstructure of cast pure aluminum (CPAl). A standard test method of TP-1 was adopted and the efficiency of TiBAl grain refiners was determined according to the average grain sizes. It was found that Al-3Ti-1B alloys from different suppliers yield different grain sizes, however, Al-5Ti-1B alloy has better efficiency than Al-3Ti-1B alloy system on CPAl material. The optimum holding time for CPAl melt at 750°C is 5 minutes to achieve a fine grain size.

Effect of Al-V-B Grain Refiner on Refining Aluminium Alloys: Estimation from Ab Initio Calculations

Atomic Investigation of Alloying Cr, Ti, Y Additions in a Grain Boundary of Vanadium

Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations

The Evaluating Study of the Refining Effect of Al-Ti-C and Al-Ti-B on Aluminum

Development of Grain Refinement in Aluminium Field

High-Temperature In-Situ Synthesis and Formation Mechanism of Vb2 Substrates in Al-V-B Grain Refiner

Efficiency of different commercial TiBAl grain refiners on refinement of pure aluminum cast structures

The Grain Refinement of 1070 Alloy by Different Al-Ti-B Mater Alloys and Its Influence on the Electrical Conductivity

Grain Refinement of Al-5Ti-0.62C-0.2Nd Grain Refiner for Commercial Pure Aluminum and Its Effect on Mechanical Properties

High-temperature in-situ synthesis and formation mechanism of VB 2 substrates in Al-V-B grain refiner

Effectively Refining Al-10Si Alloy Via Al-Ti-Nb-B Refiner with Nb2O5

Quantifying the effects of grain refiners (AlTiB and Y) on microstructure and properties in W319 alloys

Research of Grain Refining on Pure Al by Three Different Master Alloys

Effect of Vanadium/Boron Ratio on the Microstructure of Al-V-B Master Alloy and Their Grain Refining of Alloy A356.2

Performance Comparison of AlTiC and AlTiB Master Alloys in Grain Refinement of Commercial and High Purity Aluminum

Design of Newly Effective Grain Refiner for Aluminum Based on Medium-Entropy Metal Diboride

Enhanced grain refinement and mechanical properties of AZ91 alloy by a novel Al-5.1V-2.3B refiner containing VB 2 and VB particles

Quantities of grains of aluminum and those of TiB2 and Al3Ti particles added in the grain-refining processes

On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Master Alloys

Intermetallic Growth and Interfacial Properties of the Grain Refiners in Al Alloys

Synergistic Effect of La and TiB2 Particles on Grain Refinement in Aluminum Alloy