Abstract:A pulsed laser for laser guide stars with a 100 MHz repetition rate and 1 ns pulse width was achieved by external modulation of a continuous wave (CW) laser with a 70 kHz spectrum width. The laser is amplified first by two fiber pre-amplifiers and then by four solid-state power amplifiers. The laser achieves gains as high as 36 dB in the fiber pre-amplifiers due to the long gain medium length. The output power from the fiber amplifiers is 2.1 W. The laser receives further amplification in the solid-state amplifiers and retains good beam quality by aberration compensation. The final output average power is 102.9 W, and the beam quality factor M-2 is 1.46. The laser reaches high power without spectrum width and pulse width broadening at the 100 MHz repetition rate. The spectrum width of the pulsed laser is less than 0.8 GHz, which is close to the Fourier transform limit. Such a laser with single-frequency, high-repetition, and high-power features along with good beam quality will be valuable for many research areas. (C) 2014 Optical Society of America

High Peak Power Green Light Generation by Frequency Doubling of a Superluminescent Pulse Amplifier System

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Efficient Green-Light Generation by Frequency Doubling of a Picosecond All-Fiber Ytterbium-Doped Fiber Amplifier in PPKTP Waveguide Inscribed by Femtosecond Laser Direct Writing

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

670 Kw Nanosecond All-Fiber Super-Irradiation Pulsed Amplifiers at High Repetition Rates

Generating A 2.4-W Cw Green Laser by Intra-Cavity Frequency Doubling of A Diode-Pumped Nd:Gdvo4 Laser with A Mgo:Ppln Crystal

Compact Passively Q-switched Green Laser with Periodically Poled MgO:LiNbO 3

2 W Quasi-White-light Based on Idler-Resonant Optical Parametric Oscillation Cascading Sum-Frequency Generation with PPSLT

High Energy and High Peak Power Nanosecond Pulses Generated by Fiber Amplifier

Efficient generation of >2 W of green light by single pass frequency doubling in PPMgLN

Generation of Red Light at 660 Nm by Frequency Doubling a Nd:YAG Laser with Periodically-Poled Stoichiometric LiTaO 3

Nonlinear Generation of a Neat Semi-Gaussian Laser Beam with a Transversely Varying Periodically-Poled LiTaO_3 Crystal

30 W Output of Short Pulse Duration Nanosecond Green Laser Generated by a Hybrid Fiber-Bulk MOPA System

High Average Power All-Fiber Superluminescent Pulse Amplifier with Tunable Repetition Rates and Pulse Widths

Generation and Evaluation of an Efficient Femtosecond Green Laser

Nanosecond-pulse High-Peak-power Circle-Focusing Laser Beam for Laser Processing

Generation of 840 mW of red light by frequency doubling a diode-pumped 1342 nm Nd:YVO4 laser with periodically-poled LiTaO3

Efficient Generation of Red Light by Frequency Doubling in a Periodically-Poled Nearly-Stoichiometric LiTaO3 Crystal

&Gt;10 Kw Peak Power Self-Frequency Doubling Laser

LD-pumped Q-switched self-frequency-doubling laser

Efficient continuous wave green light generation in a periodically poled LiTaO3 crystal by single- pass frequency doubling