Abstract:Hybrid gas-liquid electrical discharge for removing the pollutants in aqueous solution was investigated for the decolorization of methylene blue(MB).In order to promote the process of hybrid gas-liquid electrical discharge,some activated alumina particles were filled between the two electrodes,and the solution to be treated was sprinkled on the surface of the particles.Due to these particles existing in the reaction region,the space and time distribution of discharge became more uniform.And at the same time the activated alumina particles could be polarized when the pulsed high voltage was applied on the electrodes,a strong electrical field would be formed around every particles,which induced the formation of the local discharge.The results of dynamic experiment indicate that the biggest removal efficiency of MB could be reached under the conditions of applied voltage 25 kV,initial concentration of MB 5mg/L and initial pH value 11 after 120min' reaction.The decolorization rate increased with increasing applied voltage,decreasing flow rate,decreasing initial concentration and increasing pH value of the solution.The energy efficiency was(36.56～233.65)mg/(kWh) at different conditions.pH was a very important factor for the removal rate of MB in the pulsed high voltage discharge.When pH was higher,the energy efficiency could be higher.In the pulsed high voltage electric field,activated alumina enhanced the electric intensity and simultaneously the discharge between the electrodes also increased the adsorption of activated alumina for MB.The synthetic effects of the high voltage electrical field and activated alumina accelerated the degradation course of MB.

Decoloration Of Methylene Blue By Padding Bed In Pulsed High Voltage Electric Field

Decolorization of Methylene Blue in Hybrid Gas-liquid Electrical Discharge

Decoloration of Methylene Blue by Ceramisrt Packed-Bed in Pulsed High Voltage Electric Field

Degradation of Methylene Blue Via Dielectric Barrier Discharge Plasma Treatment

Degradation of Methylene Blue by Dielectric Barrier Discharge Plasma Coupled with Activated Carbon Supported on Polyurethane Foam

Degradation of Dye Wastewater by Pulsed High-Voltage Discharge Combined with Spent Tea Leaves

Study on the coagulation treatment of activated dye wastewater

Treatment of methylene blue wastewater by dielectric barrier discharge plasma combining with halloysite adsorption process

Microwave enhanced Fenton process for the removal of methylene blue from aqueous solution

Electrical Characteristics of Pulsed-Discharge Plasma for Decoloration of Dyes in Water

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Degradation of organic dye wastewater by H2O2-enhanced aluminum carbon micro-electrolysis

Degradation of methylene blue in aqueous solution by glow discharge electrolysis plasma

Electro-catalytic Degradation of Methylene Blue Wastewater Assisted by Fe2O3-modified Kaolin

Degradation of methylene blue using double-chamber dielectric barrier discharge plasma reactor

Removal of Phenol by Activated Alumina Bed in Pulsed High-Voltage Electric Field

Dye Wastewater Treatment by a Combined Hydrolytic Acidification—Membrane Bioreaetor Processes

Pulse-electrochemical oxidation for methylene blue

Combination Of Plasma Oxidation Process With Microbial Fuel Cell For Mineralizing Methylene Blue With High Energy Efficiency

Decoloration of dyes by active species jet from gas phase surface discharge system

Study on Decolorization of the Wastewater Containing Dyestuffs by Aluminum Magnesium Double Hydroxide