Abstract:The hybrid joint of titanium alloy (Ti-6Al-4V) / carbon fibers reinforced thermoplastic (CFRTP) has gained high interest from the industry due to lightweight. However, the bonding reliability of fabricated joints is relatively low due to the confined mechanical interlocking and weak interfacial chemical interactions, which limits its application for engineering. Herein, the novel functional poly glycidyl methacrylate-b-poly methacryloxy propyl trimethoxyl silane (PGMA-b-PMPTS) diblock copolymers were synthesized and introduced at the contact interface of Ti-6Al-4V / carbon fibers reinforced polyether-ether-ketone joints for enhancing the bonding reliability by directional induction of chemical interactions. Fourier-transform infrared spectroscopy (FT-IR) analysis and density function theory (DFT) simulation calculation proved that both the Si-O-Ti covalent bonds and secondary interactions were successfully induced directionally at the bonding interface. The tensile-shear strength and bending strength were thus significantly improved by 341 % to 40.17 MPa and 152 % to 238.53 MPa compared with that of 9.09 MPa and 94.53 MPa in pretreated case. The bonding reliability improved gradually with the increase of molecular weight and molecular weight ratios between functional groups of PGMA-b-PMPTS diblock copolymers. The adhesion ratio of resin-carbon fibers mixture on failure surface increased to 89.6 % after the modification with synthesized PGMA-b-PMPTS diblock copolymers, which further verified the feasibility of promoting bonding strength of Ti-6Al-4V / CFRTP by inducing the high-density interfacial interactions directionally. Current work exhibits a simple yet attractive interfacial modification strategy to achieve high-reliability hybrid joints between metal and thermoplastics.

A Fusion Bonding Device For Joining Thermoplastic Modified Thermoset Matrix Composites

A review of joining techniques for thermoplastic composite materials

Fusion bonding of thermosets composite structures with thermoplastic binder co-cure and prepreg interlayer in electrical resistance welding

Advances in joining technology of carbon fiber-reinforced thermoplastic composite materials and aluminum alloys

Summary of thermosetting composite material welding

Friction Stir Welding/processing of Polymers and Polymer Matrix Composites

Fusion Bonding Possibility for Incompatible Polymers by the Novel Ultrasonic Welding Technology: Effect of Interfacial Compatibilization

Fusion joining of thermoplastic composites with a carbon fabric heating element modified by multiwalled carbon nanotube sheets

Ultrastrong Intrinsic Bonding for Thermoset Composites Via Bond Exchange Reactions

Improving the Quality of Resistance Welded Thermoplastic Composite Joints by Applying Ultrasonic

Thermoplastic Composites Fiber Placement Process Research

Enhancing the Bonding Reliability of Titanium Alloy / CFRTP Hybrid Joint by Directionally Inducing High-Density Covalent Bond and Secondary Interaction Via Functional Diblock Copolymer

Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

Two-Step Heat Fusion Kinetics and Mechanical Performance of Thermoplastic Interfaces

Friction-based welding of metal to polymer

On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Polymer-Metal Direct Molding Technology

Welding and Riveting Hybrid Bonding of 6061 Al and Carbon Fiber Reinforced Composites

Research Progress in Joining of Carbon Fiber-Reinforced Polymer Composites and Aluminum/magnesium Alloys

Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

Advances and Future Prospects of Adhesive Bonding and Co-Consolidation Technologies for Aviation Carbon Fiber Thermoplastic Composites