Abstract:The propagation of the non-axisymmetric guided wave in the small-diameter pipe is complicated, which makes the circumferential position of the defect difficult to be determined. This article reports on the design of a segmented axially magnetized magnetostrictive patch transducer array for efficient transduction of non-axisymmetric L(M,2) modes to determine defect’s axial and circumferential positions in the small-diameter pipe. First, the background of the magnetostrictive patch transducer and non-axisymmetric guided wave in the pipe was presented. Moreover, the theoretical background to the influence of the length-to-width ratio of the magnetized rectangular patch on the demagnetizing factors was introduced. Second, the method of the pipe health monitoring using the designed segmented axially magnetized magnetostrictive patch transducer array was proposed. Third, the most suitable multi-belts of the flexible printed coils were chosen to provide the dynamic magnetic field by the comparison experiments. Then the signal amplitudes of the segmented axially magnetized magnetostrictive patch transducer array with different length–width ratios of magnetostrictive materials were compared with each other to prove the principle of demagnetization. Another two magnetostrictive patch transducer arrays employing permanent magnets were compared with the proposed segmented axially magnetized magnetostrictive patch transducer array. The experiments of pipe health monitoring were carried out to prove that the proposed method can realize pipe health monitoring over time. Fourth, the defect orientation experiments in a 304 stainless steel pipe with 48 mm inner diameter and 2 mm thickness were performed using the proposed segmented axially magnetized magnetostrictive patch transducer array at 650 kHz. The prediction of the circumferential position of the defects correlated well with the defect’s true location through matching the angular profiles of the experimental results and the modulated numerical analysis for several axial distances. The experimental results for the segmented axially magnetized magnetostrictive patch transducer array demonstrated that the proposed segmented axially magnetized magnetostrictive patch transducer array could potentially be applied to detect the axial and circumferential positions of the defect in a small-diameter pipe.

Defect Detection in Concrete-Covered Pipe by Using Smart Magnetostrictive Patch Transducer and Demagnetizing Factors

Signal Strength Enhancement of Magnetostrictive Patch Transducers for Guided Wave Inspection by Magnetic Circuit Optimization

Axial Magnetized Patch for Efficient Transduction of Longitudinal Guided Wave and Defect Identification in Concrete-Covered Pipe Risers

Demagnetization-based Axial Magnetized Magnetostrictive Patch Transducers for Locating Defect in Small-Diameter Pipes Using the Non-Axisymmetric Guided Wave

Methodology for Circumferential Localisation of Defects Within Small-Diameter Concrete-Covered Pipes Based on Changing of Energy Distribution of Non-Axisymmetric Guided Waves

Design of Guided Wave Magnetostrictive Patch Transducer with Vertical Static Bias Magnetic Field for Pipe Inspection

Novel design of an effective pneumatic magnetostrictive patch transducer based on the ultrasonic guided wave for application of fast pipe health inspection

Novel Design of a Smart and Harmonized Flexible Printed Coil Sensor to Enhance the Ability to Detect Defects in Pipes

Defect Detection in the Dead Zone of Magnetostrictive Sensor for Pipe Monitoring

Design and Application of a Magnetoelectric Composite Sensor for Pipeline Defect Detection

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Defect localization method for ferromagnetic pipes based on stepped magnetization in magnetic permeability perturbation testing

Research on Crossing-Pipe Support Structure Defect Detection of EMAT-Excited CSH Wave

Residual Magnetic Field Testing System with Tunneling Magneto-Resistive Arrays for Crack Inspection in Ferromagnetic Pipes

Development of a Meander-Coil-Type Dual Magnetic Group Circumferential Magnetostrictive Guided Wave Transducer for Detecting Small Defects Hidden behind Support Structures

A Magnetostrictive Guided-Wave Nondestructive Testing Method With Multifrequency Excitation Pulse Signal

Evaluation of Pipe Thickness by Magnetic Hammer Test with a Tunnel Magnetoresistive Sensor

Investigation of a Magnetic Tunnel Junction Based Sensor for the Detection of Defects in Reinforced Concrete at High Lift-Off

A technology of multiple-harmonic magnetic field excitation and its signal-processing method for noncontact steel pipeline defect detection

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Nondestructive Testing Method for Internal Defects in Ferromagnetic Materials under Weak Bias Magnetization