Abstract:Roads are greatly essential in a transportation system.The quality of road pavements has a crucial impact on the driving safety,comfort,and the cost of the roads.Therefore,timely monitoring the pavement conditions to guarantee the secure operation of the traffic system is significant.Currently,time-consuming field investigations and manual measurements are the conventional and main methods to detect and evaluate the pavement conditions.However,many of these methods are destructive to the road surface.Many forms of remote sensing data without destructive effect on pavement were introduced with the support of computer technology and remote sensing to detect pavement conditions,such as digital images,LiDAR,and Radar.This paper reviewed the current research status and problems in pavement condition detection based on remote sensing technologies.Remote sensing,as a non-intrusive method,has the advantages of wide spatial coverage and objective and repeatable data with high temporal resolution that can be analyzed by computer conveniently.Generally,the methods can be divided into four types,namely,the multi-/hyper-remote sensing,the thermal remote sensing,the microwave remote sensing,and three dimensional reconstructionbased on the categories of the sensors used in pavement monitoring.The multi-/hyper-remote sensing primarily utilizes the reflective spectral information of the pavement,which contains three specific methods,namely,image processing method,the method based on the variation of pavement brightness,and spectral modeling.The thermal remote sensing is based on the radiation characteristics of pavement,which contains two methods based on the variation of pavement temperature and emissivity information.A microwave device called Ground Penetrating Radar (GPR) has been widely used to detect the pavement defects by road departments.The three dimensional information of the road surface can be acquired using photogrammetry and LiDAR systems to measure the elevation information of the deteriorated pavement.An experiment using the Multiple Endmember Spectral Mixing Analysis (MESMA) and WorldView-2 satellite image was conducted to evaluate the potential of remote sensing in aging pavement monitoring.Results show that all methods are greatly potential in pavement condition monitoring.However,these methods still have some limitations in terms of complexity,accuracy,and robustness.High resolution remote sensing technologies,such as sub-meter satellite data and low-altitude UAV systems,can achieve large-range and rapid detection of the road pavement conditions in question.The results of the case study in Liangxiang area of Beijing show that the road pavement aging conditions could be detected appropriately and mapped with higher accordance with the practical pavement conditions.Therefore,some ground remote sensing methods have been applied successfully in pavement condition detection,such as the Pavement Management Systems (PMS),GPR,and so on.However,spacebome and airborne remote sensing methods still encounter problems (poor robustness and low accuracy etc.)on pavement condition detection.For instance,the applicability of pavement spectral analysis and airbome or satellite data in pavement condition detection applications still require additional future works.Finally,a case study using satellite multispectral data to monitor asphalt pavement aging conditions is presented to demonstrate the usefulness of remote sensing technology in road pavement monitoring and assessment.

Research on 3D Information Perception System of Highway Pavement Based on Artificial Intelligence

A Depth Camera-Based Intelligent Method for Identifying and Quantifying Pavement Diseases

Application Research of 3D Geological Radar Detection Technology in Urban Road Disease Survey

Research on Asphalt Pavement Disease Detection Based on Improved YOLOv5s

A real-time 3D scanning system for pavement distortion inspection

Image Enhancement Technology in Pavement Disease Detection System

AN GROUND AND UNDER-GROUND URBAN ROADS SURVEYING APPROACH USING INTEGRATED 3D LIDAR AND 3D GPR TECHNOLOGY

Three-Stage Pavement Crack Localization and Segmentation Algorithm Based on Digital Image Processing and Deep Learning Techniques

A Distributed Pavement Monitoring System Based on Internet of Things

Automating intersection marking data collection and condition assessment at scale with an artificial intelligence-powered system

Intelligent detection device of pavement disease based on image recognition technology

Progress on Road Pavement Condition Detection Based on Remote Sensing Monitoring

Designing and Building an Intelligent Pavement Management System for Urban Road Networks

Real-Time and Efficient Traffic Information Acquisition via Pavement Vibration IoT Monitoring System

Research on Intelligent Vehicle Detection and Tracking Method Based on Multivision Information Fusion

Research on detection method of pavement diseases based on Unmanned Aerial Vehicle (UAV)

Vision-Based Pavement Marking Detection and Condition Assessment—A Case Study

Design of airport road surface inspection system based on machine vision and deep learning

Pavement surface defect recognition method based on vehicle system vibration data and feedforward neural network

Automatic Detection and Assessment of Pavement Marking Defects with Street View Imagery at the City Scale

Road condition judgment system of railway transportation based on artificial intelligence recognition technology