Abstract:The paper presents a technique to obtain an electrically-tunable matching between the series and parallel resonant frequencies of a piezoelectric MEMS acoustic transducer to increase the effectiveness of acoustic emission/detection in voltage-mode driving and sensing. The piezoelectric MEMS transducer has been fabricated using the PiezoMUMPs technology, and it operates in a plate flexural mode exploiting a 6 mm × 6 mm doped silicon diaphragm with an aluminum nitride (AlN) piezoelectric layer deposited on top. The piezoelectric layer can be actuated by means of electrodes placed at the edges of the diaphragm above the AlN film. By applying an adjustable bias voltage Vb between two properly-connected electrodes and the doped silicon, the d31 mode in the AlN film has been exploited to electrically induce a planar static compressive or tensile stress in the diaphragm, depending on the sign of Vb, thus shifting its resonant frequency. The working principle has been first validated through an eigenfrequency analysis with an electrically induced prestress by means of 3D finite element modelling in COMSOL Multiphysics®. The first flexural mode of the unstressed diaphragm results at around 5.1 kHz. Then, the piezoelectric MEMS transducer has been experimentally tested in both receiver and transmitter modes. Experimental results have shown that the resonance can be electrically tuned in the range Vb = ±8 V with estimated tuning sensitivities of 8.7 ± 0.5 Hz/V and 7.8 ± 0.9 Hz/V in transmitter and receiver modes, respectively. A matching of the series and parallel resonant frequencies has been experimentally demonstrated in voltage-mode driving and sensing by applying Vb = 0 in transmission and Vb = −1.9 V in receiving, respectively, thereby obtaining the optimal acoustic emission and detection effectiveness at the same operating frequency.

Resonance Acoustic Field Position Sensor

An acoustic position sensor

Design of Piezoelectric Resonant Sound Emission Receiver Sensor

Directional Multi-Resonant Micro-Electromechanical System Acoustic Sensor for Low Frequency Detection

Directional Resonant MEMS Acoustic Sensor and Associated Acoustic Vector Sensor

A Monolithic Integrated MEMS Acoustic Dyadic Sensor

Dual-Use Strain Sensors for Acoustic Emission and Quasi-Static Bending Measurements

Flexible Hair‐Like Piezoelectric Acoustic Particle Velocity Sensor with Enhanced Sensitivity for Speaker Recognition

Piezoelectric MEMS Acoustic Transducer with Electrically-Tunable Resonant Frequency

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Resonance Effects of Bilayered Piezoelectric Films Used for Bulk Acoustic Wave Sensors

Sound-Resonance Hydrogen Sensor

Novel Resonant Pressure Sensor Based on Piezoresistive Detection and Symmetrical In-Plane Mode Vibration

New Solid-State Acoustic Motion Sensors: Sensing Potential Estimation for Different Piezo Plate Materials

Piezoelectric Wafer Active Sensor Transducers for Acoustic Emission Applications

Enhanced Directional Acoustic Sensing with Phononic Crystal Cavity Resonance

A thin acoustic touchless sensor using flexural vibration

Multifunctional and Wearable Patches Based on Flexible Piezoelectric Acoustics for Integrated Sensing, Localization, and Underwater Communication

Resonance Behavior of Piezoelectric Polymer Diaphragms for Biosensors

High-Sensitivity EFPI-Based Acoustic Sensor Using in-Fiber Collimator and Adjustable 45° Mirror

Frequency Wavenumber Design of Piezoelectric Sensors for Impact Monitoring