Abstract:This study presents a fabrication strategy for 3D carbon microstructures using via two-photon vat photopolymerization (2p-VPP) and susceptor-assisted microwave pyrolysis (SMWP). Fabricating carbon-based electrode materials with miniaturized functional structures is pivotal for developing high-performance electrochemical microdevices. However, efficiently producing these structures in the submicron regime with desired materials is still challenging. To address this, a hybrid microfabrication strategy was developed, and 3D carbon-based microstructures with submicron resolution were successfully produced. A carbon nanotube nanocomposite photoresist (SCNT-PR1) with improved dispersibility was first prepared. After a comprehensive printability assessment, 3D microstructures with a resolution of 833 ± 54 nm were produced using 2p-VPP. Through SMWP, the microstructures were transformed into pyrolytic carbon (PyC) nanocomposite microstructures with retained geometrical features. SMWP was shown to produce PyC with a less disordered carbon atomic structure, thanks to the accelerated pyrolysis reaction under MW irradiation, when compared to pyrolysis using a conventional furnace. The resistivity was reduced by over 75% from 0.69 ± 0.13 Ω cm to 0.16 ± 0.01 Ω cm, and enhanced electrochemical performance was confirmed. The fabricated PyC nanocomposite showed a further 12% reduction in electrical resistivity and a 20% lower charge transfer resistance for the redox reaction when using SCNT-PR1 as the precursor. Overall, this hybrid fabrication strategy demonstrates the advantages of producing 3D carbon microstructures with precise control over the geometric features and enhancing electrical and electrochemical properties compared to the conventional pyrolysis method. Its potential could be extended to the fabrication of miniaturized electrochemical devices, including microelectronics and point-of-care devices.

A Simple New Method for the Fabrication of Carbon Paste Microelectrode and Its Characterization

Electrochemical Determination of Dopamine Using a Carboxyl-functionalized Carbon Nanotube-Modified Carbon Paste Electrode Doped with Polymeric Ferric Sulfate

Study on an Inlaid Super-Thin Microcrystalline Cellulose Modified

Carbon Paste Electrodes in Modern Electroanalysis

Electrochemical Behavior of Super-thin Carbon Paste Electrode and Its Analytical Application

Rapid Fabrication of Porous Silicon/carbon Microtube Composites As Anode Materials for Lithium-Ion Batteries

Carbon composite microelectrodes fabricated by electrophoretic deposition.

An Ionic Liquid-Type Carbon Paste Electrode and Its Polyoxometalate-Modified Properties

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Fabrication of Disk Ultramicroelectrode Using Nanoskiving Method.

Fabrication of Porous Carbon Micropillars Using a Block Copolymer As Porogen

An Acid-Pasting Strategy Towards PTCDA Based High Performance Lithium/sodium Ion Battery Cathodes

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Fabrication of carbon nanotube-nickel nanoparticle hybrid paste electrodes for electrochemical sensing of carbohydrates

A Novel Fabrication Method of Carbon Electrodes Using 3D Printing and Chemical Modification Process.

Fabrication of A 3d Micro/Nano Dual-Scale Carbon Array and Its Demonstration As the Microelectrodes for Supercapacitors

Microelectrode fabrication by electrochemical turning

Fabrication and characterization of au disk mircoelectrodes

Renewable New Copper Complex Bulk‐Modified Carbon Paste Electrode: Preparation, Electrochemistry, and Electrocatalysis

Fabrication of predesigned 3D carbon based microstructures via two-photon vat photopolymerization and susceptor-assisted microwave post-processing

Millisecond photothermal carbonization for in-situ fabrication of mesoporous graphitic carbon nanocomposite electrode films