New Method Of Modeling Uncertainty For Robust Flutter Suppression
Wenmin Qian,Rui Huang,Haiyan Hu,Yonghui Zhao
DOI: https://doi.org/10.2514/1.C031987
IF: 1.919
2013-01-01
Journal of Aircraft
Abstract:T HE research of active flutter suppression has witnessed numerous achievements over the past decades [1–4]. However, it is still a rewarding field because of some open problems, such as the design of robust controllers. The structured singular value from the theory of robust control is one of the methods to design the robust control law for flutter suppression [5–9]. In practice, the flutter boundary greatly depends on the flight parameters, such as the dynamic pressure or the Mach number. Therefore, an apparent way to design the robust control law for flutter suppression in the μ framework is to introduce a perturbation to flight parameters and to determine the smallest perturbation that causes system instability. For example, Lind derived a linear fractional transformation (LFT) for the robust aeroservoelastic (ASE) stability analysis with parameterization around perturbation in dynamic pressure [10]. Barker et al. proposed a gain-scheduled controller depending on both Mach and dynamic pressure in a linear fractional manner [11]. Because the dynamic pressure is related to both airspeed and air density, Lind [12] replaced the formulation of the dynamic pressure with a polynomial function of airspeed. Moulin [13] presented the design of a μ controller of flutter suppression based on the state-space LFT model of anASE system incorporating airspeed and air-density variations as structured parametric uncertainties. However, the dimension of the structured uncertainties of the resulting models may be rather high. Thus, the design of the robust controller for flutter suppression becomes difficult, and the order of the controller remains high. If the dimension of the uncertainty block can be reduced in modeling uncertainty, the controller can be easily designed from the reduced model of uncertainty. The objective of this note is to present a new scheme to model the state-space LFT system of a multiple-actuated wing (MAW) with airspeed and air-density uncertainties so as to reduce the dimension of the resulting uncertainty block. The rest part of the note is organized as follows. In Sec. II, the mathematical model of the ASE system is established. In Sec. III, the LFT model of the ASE system with airspeed uncertainty is derived by using Moulin’s method and new scheme, respectively. In Sec. IV, the LFT model of the ASE system with airspeed and air-density variations is also presented. In Sec. V, two kinds of μ controllers, i.e., a single-input/single-output (SISO) controller and a multi-input/multi-output (MIMO) controller, are presented to suppress the flutter instability of the MAW model incorporating airspeed and air-density variations. Finally, some conclusions are drawn in Sec. VI.