Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Economic Evaluation Of Biomass-Based Energy Systems With Co2 Capture And Sequestration In Kraft Pulp Mills - The Influence Of The Price Of Co2 Emission Quota

CO2 Capture in Pulp and Paper Mills: CO2 Balances and Preliminary Cost Assessment

Potential and cost-effectiveness of CO2 reductions through energy measures in Swedish pulp and paper mills

Biomass-based carbon capture and utilization in kraft pulp mills

Co2 Reduction By Using Biomass From The Pulp Industry - System Simulation For Cogeneration Of Methanol, Power And Heat

Integration of carbon capture in a pulp mill—effect of strategic development towards better biomass resource utilization

Potential And Cost-Effectiveness Of Co2-Reducing Measures In The Pulp And Paper Industry

Comparisons Of Co2-Reducing Alternatives For Heat And Power Generation: Co2-Capturie And Fuel Shift To Biomass

Life Cycle Cost Assessment of Biomass Co-Firing Power Plants with CO2 Capture and Storage Considering Multiple Incentives

CO2 Capture in a Thermal Power Plant Using Sugarcane Residual Biomass

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol

Energy, Exergy and Economic (3E) Analysis of a Novel Integration Process Based on Coal-Fired Power Plant with CO2 Capture & Storage, CO2 Refrigeration , and Waste Heat Recovery

Double Yields and Negative Emissions? Resource, Climate and Cost Efficiencies in Biofuels With Carbon Capture, Storage and Utilization

Economic and environmental evaluation of coal-and-biomass-to-liquids-and-electricity plants equipped with carbon capture and storage

Cost-optimal CO 2 capture and transport infrastructure—A case study of Sweden

Operating Optimization of Biomass Direct-Fired Power Plant Integrated with Carbon Capture System Considering the Life Cycle Economic and CO2 Reduction Performance

Combination of CO 2 electrochemical reduction and biomass gasification for producing methanol: A techno-economic assessment

Potential for Negative Emissions by Carbon Capture and Storage From a Novel Electric Plasma Calcination Process for Pulp and Paper Mills

CO2 mitigation or removal: The optimal uses of biomass in energy system decarbonization

Exploring the Role of Forest Biomass in Abating Fossil CO2 Emissions in the Iron and Steel Industry – the Case of Sweden

Techno-economical Analysis of CO2 Capture from Biomass-derived Syngas