Abstract:As one of the most efficient, low-cost, and readily available electrocatalysts for oxygen evolution reaction (OER) in alkaline environments, the nickel-iron electrocatalyst is of great significance to commercial water splitting. In this study, NiFe-layered double hydroxide loaded on nickel foam (NiFe-LDH/NF) was synthe-sized via a simple one-step hydrothermal method, whose OER catalytic performance could be successfully optimized by further electrochemical reconstruction. The results show that NF is an effective precursor to loading crystallized Ni(OH)2 nanoparticles during hydrothermal synthesis, leading to the generation of high-performance NiOOH during OER reconstruction. Under the optimal Ni:Fe feeding ratio, Ni2Fe1-LDH/NF requires an ultra-low OER overpotential of 239 mV at 50 mA cm-2 and 260 mV at 100 mA cm-2 , whose Tafel slope is only 64.1 mV dec-1. Impressively, Ni2Fe1-LDH/NF also achieves an ultra-low voltage of 1.44 V at 10 mA cm-2 with excellent long-term stability for overall water splitting. Unlike the previous viewpoint that only Ni species dominate surface reconstruction of NiFe-LDH, in this article the decisive influence related to Fe species on the reconstruction layers' activity and stability is confirmed by electrochemistry, Raman, and XPS analysis during reconstruction process. During OER reconstruction, the surface Ni:Fe ratios can be "self -adaptively" regulated to an appropriate region, thus the stable reconstruction layers rich in NiOOH can be formed as the protective shells for NiFe-LDH. Furthermore, such "self-adaptive" reconstruction, assisted with appropriate initial Ni:Fe feeding ratios, can also stimulate more Ni3+ active sites for OER, benefitting the outstanding catalytic performance of NiFe-LDH/NF for overall water splitting and prospective large-scale application.(c) 2022 Elsevier B.V. All rights reserved.

Strongly coupling of amorphous/crystalline reduced FeOOH/-Ni(OH)<sub>2</sub> heterostructure for extremely efficient water oxidation at ultra-high current density

Strongly coupling of amorphous/crystalline reduced FeOOH/α-Ni(OH)2 heterostructure for extremely efficient water oxidation at ultra-high current density

Self-adaptively Electrochemical Reconstruction of NiFe-layered Double Hydroxide on Ni Foam for High-Performance Water Splitting

A strongly coupled 3D ternary Fe2O3@Ni2P/Ni(PO3)2 hybrid for enhanced electrocatalytic oxygen evolution at ultra-high current densities

Activating Lattice Oxygen in a Nanoporous Crystalline/Amorphous NiFe(II, III)OxHy Heterostructure for Electrocatalytic Water Oxidation with Ampere-Level Activity and Durability

Bimetallic Oxyhydroxide as a High-Performance Water Oxidation Electrocatalyst under Industry-Relevant Conditions

Electronic coupling strategy to boost water oxidation efficiency based on the modelling of trimetallic hydroxides Ni<sub>1-x-y</sub>Fe<sub>x</sub>Cr<sub>y</sub> (OH)<sub>2</sub>: From theory to experiment

Facilitating interface charge transfer via constructing NiO/NiCo 2 O 4 heterostructure for oxygen evolution reaction under alkaline conditions

Surface reconstruction enables outstanding performance of Fe2O3/Ni(OH)2 nanosheet arrays for ultrahigh current density oxygen evolution reaction

Accelerated Oxygen Evolution Kinetics by Engineering Heterojunction Coupling of Amorphous NiFe Hydr(oxy)oxide Nanosheet Arrays on Self‐Supporting Ni‐MOFs

Boosting Charge Transfer Via Interface Charge Reconstruction Between Amorphous NiFe-LDH and Crystalline NiCo2O4 for Efficient Alkaline Water/seawater Oxidation

Boosting charge transfer via interface charge reconstruction between amorphous NiFe-LDH and crystalline NiCo 2 O 4 for efficient alkaline water/seawater oxidation

Electrochemical Deposited Amorphous Bimetallic Nickle-Iron (oxy)hydroxides Electrocatalysts for Highly Efficient Oxygen Evolution Reaction

Efficient Electrocatalytic Oxygen Evolution at Extremely High Current Density over 3D Ultrasmall Zero‐Valent Iron‐Coupled Nickel Sulfide Nanosheets

NiFe Oxalate Nanomesh Array with Homogenous Doping of Fe for Electrocatalytic Water Oxidation.

Amorphous NiFeB nanoparticles realizing highly active and stable oxygen evolving reaction for water splitting

Amorphous–Amorphous Coupling Enhancing the Oxygen Evolution Reaction Activity and Stability of the NiFe-Based Catalyst

Constructing NiFe-LDH@NixCoySe2/NF nanosheets heterojunction for high-current-density efficient water oxidation

The rapid self-reconstruction of Fe-modified Ni hydroxysulfide for efficient and stable large-current-density water/seawater oxidation

Stepwise Electrochemical Construction of FeOOH/Ni(OH)(2) on Ni Foam for Enhanced Electrocatalytic Oxygen Evolution

Amorphous high-entropy IrRuCrFeCoNiO x as efficient water splitting oxygen evolution reaction electrocatalysts