Abstract: In strong-field physics experiments with intense lasers, it is of paramount importance to single-shot diagnose the temporal contrast between laser pulse peak and its noise pedestal. This allows fast optimization of pulse contrast and meaningful comparison with theory for each pulse shot, and it can help new outcomes from clean laser-plasma interactions. Thus far, high contrast ratios up to ~10^10, required by present petawatt (PW) class lasers, have been accessible in both generation and single-shot characterization. However, ultrahigh contrast ~10^13, required by the planned 200-PW lasers, challenges intense laser technology and remains an open question. This paper reports on the first demonstration of such an ultrahigh-contrast measurement by adapting single-shot cross-correlator (SSCC). We introduce an ultrafast method that enables to determine the SSCC detection limit. Our strategy mimics the test laser having known ultrahigh contrast in the measurement frame of time-to-space mapping. The ultimate contrast-measurement limit of 10^13 is achieved, which corresponds to the highest pulse intensity set by SSCC damage threshold and the lowest noise pedestal set by single-photon detection. As a consequence, photon noise in the detection is observed and increases as the noise pedestal reduces. The demonstrated measurement ability at the photon noise limit is applied to a high-contrast laser system based on second-harmonic generation and optical parametric chirped-pulse amplification, suggesting accessible of ultrahigh contrast pulses.

10 11 High-Dynamic-Range Measurement for Nano-Joule-Level Weak Signal Based on Autocorrelation

Single-shot measurement of >10 10 pulse contrast for ultra-high peak-power lasers

Single-Shot 60 dB Dynamic Range Laser Contrast Measurement Using Self-Referencing Spectral Interferometry

Single-shot measurement of >10¹⁰ pulse contrast for ultra-high peak-power lasers.

Resolving ultrahigh-contrast ultrashort pulses with single-shot cross-correlator at the photon noise limit

Demonstration of Single‐Shot Measurements of 1013 Ultrahigh‐Contrast Pulses by Manipulating Cross‐Correlation

Auto-correlative weak-value amplification under strong noise background

A new method to improve the dynamic range of contrast ratio measurement on the nanosecond scale

Weak laser pulse signal detection based on analog self-correlation

Difference Weak Measurement

Autocorrelative Weak-Value Amplification and Simulating the Protocol under Strong Gaussian Noise

A Coherent Detection Method with 106 Higher Intensity Response Sensitivity Than Normal Heterodyne Interferometry

High sensitivity third-order autocorrelation measurement by intensity modulation and third harmonic detection.

Jitter-calibrated Second-Order Correlation Measurement for Pulsed Excitation with Low Repetition Rate

Single-shot Cross-Correlator for Pulse-Contrast Characterization of High Peak-Power Lasers

Single Microwire Optical Autocorrelator at 2-m Wavelength

Single-shot cross-correlator using a long-wavelength sampling pulse.

Single-Shot Pulse-Contrast Measurement Based on High-Orderquasi-Phase-Matchingcross-Correlation

Toward Ultra-high Sensitivity in Weak Value Amplification

Weak-value-amplification metrology without spectral analysis

A Signal to Noise Ratio Measurement for Single Shot Laser Pulses by Use of an Optical Kerr Gate