Abstract:This article focuses on the high-performance motion control of an accumulator assistant fast forging hydraulic press. As the accumulator has a significant impact on the motion control performance of the fast forging hydraulic press, the dynamic and static characteristics of the accumulator are studied and a simplified mathematical model is applied in the motion controller design. To hold the nonlinear parameter uncertainty associated with the accumulator model, a nonlinear damping regulator and a nonlinear robust feedback are synthesized based on the simplified mathematical model. The virtual control law lumped flow is proposed to act as the equivalent input of the fast forging hydraulic press, which successfully solves the decoupling problem and makes the motion controller design feasible. And the most economical distribution scheme is finally applied to synthesize the actual control law for each fast forging valve. In consideration of the parametric uncertainties and uncertain nonlinearities appearing in the mathematical model of the accumulator assistant fast forging hydraulic press, the discontinuous projection-based adaptive robust control is extended to synthesize the motion controller. Both simulation and experiment results demonstrate that with the proposed motion controller, the transient performance and final tracking accuracy are guaranteed although the system is subjected to various model uncertainties coming from both parametric uncertainties and uncertain nonlinearities. Furthermore, with the proposed nonlinear damping regulator, the influence of the accumulator can be well compensated and the control performance is improved.

The Velocity Feed-Forward And Compensation On Eliminating Extraneous Torque Of Electro-Hydraulic Load Simulator

Nonlinear robust dual-loop control for electro-hydraulic load simulator

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery

Harmonic and Synchronous Compound Control of a Dual-Valve Controlled Single-Rod Electro-Hydraulic Actuator.

A Two-stage Optimal Controller for Hydraulic Loading System with Mechanical Compensation

Parallel Velocity Control of an Electro-Hydraulic Actuator with Dual Disturbance Observers

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Motion Control of Electro-Hydrostatic Actuators with Modeling and Compensation of Nonlinear Bulk Modulus

Valve-based compensation for controllability improvement of the energy-saving electrohydraulic flow matching system

Dynamic Analysis and Improvement of the Electrohydraulic System under Power Limitation Control.

Decoupling Compensation for Damping Improvement of the Electrohydraulic Control System with Multiple Actuators

An improved hybrid suppression method for extraneous force of high-frequency electro-hydraulic loading system

An adaptive dead zone compensation control method for EHAs under low-speed conditions

Flow Match and Precision Motion Control of Asymmetric Electro-Hydrostatic Actuators with Complex External Force in Four-Quadrants

Pump-Based Compensation for Dynamic Improvement of the Electrohydraulic Flow Matching System.

Adaptive backstepping sliding mode compensation control for electro‐hydraulic load simulator with backlash links

Force tracking control of an electro-hydraulic control loading system on a flight simulator using inverse model control and a damping compensator

Constrained Motion Control of an Electro- Hydraulic Actuator under Multiple Time-Varying Constraints

Adaptive robust torque control of electric load simulator with strong position coupling disturbance

Decoupled Torque Control of Series Elastic Actuator with Adaptive Robust Compensation of Time-Varying Load-Side Dynamics.