Abstract:Abstract The anodic oxygen evolution reaction (OER) has significant importance in many electrochemical technologies. In proton exchange membrane water electrolyzers it plays a pivotal role for electrochemical energy conversion, yet sluggish kinetics and the corrosive environment during operation still compel significant advances in electrode materials to enable a widespread application. Up-to-date Iridium is known as the best catalyst material for the OER in acidic media due to its relatively high activity and long-term stability. However, scarcity of iridium drives the development of strategies for its efficient utilization. One promising way would be the formation of mixtures in which the noble catalyst element is dispersed in the non-noble matrix of more stable metals or metal oxides. A promising valve metal oxide is TiO x , yet the degree to which performance can be optimized by composition is still unresolved. Thus, using a scanning flow cell connected to an inductively coupled plasma mass spectrometer, we examined the activity and stability for the OER of an oxidized Ir–Ti thin film material library covering the composition range from 20–70 at.% of Ir. We find that regardless of the composition the rate of Ir dissolution is observed to be lower than that of thermally prepared IrO 2 . Moreover, mixtures containing at least 50 at.% of Ir exhibit reactivity comparable to IrO 2 . Their superior performance is discussed with complementary information obtained from atomic scale and electronic structure analysis using atom probe tomography and x-ray photoelectron spectroscopy. Overall, our data shows that Ir–Ti mixtures can be promising OER catalysts with both high activity and high stability.

Stable Ti/Irox-Sb2o5-Sno2 Anode For O-2 Evolution With Low Ir Content

Stable Ti/IrO<i><sub>x</sub></i>−Sb<sub>2</sub>O<sub>5</sub>−SnO<sub>2</sub>Anode for O<sub>2</sub>Evolution with Low Ir Content

Electrochemical Behavior of Novel Ti/Irox-Sb2o5-Sno2 Anodes

Electrochemical Properties of Ti/SnO<sub>2</sub>-Sb-Ir Electrodes Doped with a Low Iridium Content for the Oxygen Evolution Reaction in an Acidic Environment

Stable Ti/RuO2–Sb2O5–SnO2 electrodes for O2 evolution

Structure and characteristics of Ti/IrO2(x) + MnO2(1 - x) anode for oxygen evolution

A Novel IrO2 Electrode with Iridium–titanium Oxide Interlayers from a Mixture of TiN Nanoparticle and H2IrCl6 Solution

Coox Functionalized Iro2-Sb2o5-Sno2 Anode with an Enhanced Activity and Stability for Electrocatalytic Oxygen Evolution

Preparation and Properties of the Oxygen Evolution Anode with an Interlayer Containing Tin and Antimony

Preparation of Ti/SnO2–Sb–Ir–Mn Electrodes with Low Iridium Content for a Highly Efficient and Stable Oxygen Evolution Reaction

Effects of the geometry and operating temperature on the stability of Ti/IrO<sub>2</sub>–SnO<sub>2</sub>–Sb<sub>2</sub>O<sub>5</sub> electrodes for O<sub>2</sub> evolution

Investigation of surface morphology, structure and electrocatalytic properties for O2 evolution of titanium based IrO2+Ta2O5 coatings

A Highly Stable Ti/TiHx/Sb–SnO2 Anode: Preparation, Characterization and Application

Two-step electrodeposition to achieve durable IrOx electrode with a semi-crystalline structure for efficient OER

Electrodeposited SiO2 film: a promising interlayer of a highly active Ti electrode for the oxygen evolution reaction

Effect of SnO2 addition on the service life and electrochemical properties of Ti/IrO2+Ta2O5 anodes in phenolsulphonic acid solution

Electrocatalytic Properties of Ti/Pt–IrO2 Anode for Oxygen Evolution in PEM Water Electrolysis

Highly Active and Stable IrO2 and IrO2–Ta2O5 Catalysts for Oxygen Evolution Reaction

Degradation characteristics of Ti/(IrO2 + Ta2O5) coating anodes in H2so4 solution

Self-Supported Low-Crystallinity Cofe Layered Double Hydroxide Nanospheres on Monolayer Ti3c2 Electrode for Oxygen Evolution Reaction

Stabilization of an iridium oxygen evolution catalyst by titanium oxides