Abstract:From data collected by an online condition monitoring and fault diagnosis system, a higher pad temperature at the upper guide bearing in a pumped storage power generator unit installed in Guangdong province(GPSPS), China, was found. And also a relatively intensive shaft vibration occurred at the lower guide bearing. By calculating the Reynolds equation and viscosity-temperature equation of the lubricant, a curve between the pre-load coefficient and the increment of pad temperature is obtained, which shows that the larger, the pre-load coefficient, the bigger, the increment of pad temperature. For a practical unit in GPSPS, by employing Transfer matrix method and Wilson-theta method to analyze shaft vibration at different pre-load coefficients of the whole bearing or "pad pair" bearings, the results show that the larger the pre-load coefficient is, the smaller the vibration amplitude is, the shorter the time for vibration to become steady is. And an uneven pre-load coefficient of the "pad pair" bearings will cause shaft orbit from a circle to an ellipse whose long axes is at the direction of the "pad pair" with the lowest pre-load coefficient. Finally, reasons of higher pad temperature of the upper guide bearing and larger shaft vibration at the lower guide bearing are due to the inconsistent relation of bearing assembling clearance or pre-load coefficient of the upper and lower guide bearing, and also due to the too small, uneven pre-load coefficient of "pad pair" bearings. After a scheme for adjusting the bearing clearance is given, data measured show that the analysis and simulation methods are correct and the adjustment scheme to the assembling clearance of the upper and lower guide bearings is feasible and can be used to guide the field maintenance conveniently.

Experimental Study On The Load Monitoring For A 4 Pad Tilting-Pad Bearing In Large Turbine-Generator Sets

Study Of The Load Reduction For Hydro-Generator Bearing By Hybrid Magnetic Levitation

REAL-TIME LOAD-STATISTICAL METHOD WITH ON-LINE MONITORING SOFTWARE FOR SERVICE LIFE CONSUMPTION OF THE TURBINE ROTOR

Indirect Load Measurements for Large Floating Horizontal-Axis Tidal Current Turbines

The Finite Element Method on the On-line Monitoring Elastic Element for measuring Forces of the Rotating Machine

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Research on Characteristics of Tilting Pad Bearing Based on FLUENT-UDF Simulation Method

Bearing Pad Temperature Analysis Using Field Measurements and Simulation

In Situ Monitoring of Dynamic Loads on Shafting via Nanogenerators

Influence Of Bearing Pre-Load Coefficient On Shaft Vibration And Pad Temperature In A Hydroturbine Generator Unit - A Case Study

Fault diagnosis of tilting-pad type fluid film bearings in high-speed rotating machinery

Experimental Analysis on Characteristics of the Rotor System Supported by Tilting-pad Journal Bearing Considering Pivot Stiffness and Damping

Experimental Study on Multi-Decked Protuberant Foil Thrust Bearing with Different Number of Thrust Pads

Theoretical and Experimental Investigations on Directly Lubricated Tilting Pad Journal Bearing under Starved Lubrication

Thermoelastohydrodynamic Analysis of the Static Performance of Tilting-Pad Journal Bearings with the Newton–Raphson Method

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Experimental Study on Influence of Gas Volume Fraction in Two-phase Flow on Lubrication Performance of Large Tilting Pad Journal Bearing

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Indirect load measurement method and experimental verification of floating offshore wind turbine

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing