Abstract:Compliance has been exploited in various forms in robotic systems to allow rigid mechanisms to come into contact with fragile objects, or with complex shapes that cannot be accurately modeled. Force feedback control has been the classical approach for providing compliance in robotic systems. However, by integrating other forms of instrumentation with compliance into a single device, it is possible to extend close monitoring of nearby objects before and after contact occurs. As a result, safer and smoother robot control can be achieved both while approaching and while touching surfaces. This paper presents the design and extensive experimental evaluation of a versatile, lightweight, and low-cost instrumented compliant wrist mechanism which can be mounted on any rigid robotic manipulator in order to introduce a layer of compliance while providing the controller with extra sensing signals during close interaction with an object's surface. Arrays of embedded range sensors provide real-time measurements on the position and orientation of surfaces, either located in proximity or in contact with the robot's end-effector, which permits close guidance of its operation. Calibration procedures are formulated to overcome inter-sensor variability and achieve the highest available resolution. A versatile solution is created by embedding all signal processing, while wireless transmission connects the device to any industrial robot's controller to support path control. Experimental work demonstrates the device's physical compliance as well as the stability and accuracy of the device outputs. Primary applications of the proposed instrumented compliant wrist include smooth surface following in manufacturing, inspection, and safe human-robot interaction.

Robot Compliant Wrist Force/Torque Sensor And Its Position And Orientation Calculation

Study On The Robot Compliant Force/Torque Sensor

Fuzzy Control of Robot and Compliant Wrist System

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Compliant Human-Robot Object Transfer Based on Modular 3-Axis Force Sensor for Collaborative Manufacturing.

Instrumented Compliant Wrist with Proximity and Contact Sensing for Close Robot Interaction Control

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

Research on Robot Surface Tracking Motion Based on Force Control of Six-Axis Wrist Force Sensor

Ultrathin Three-Axis FBG Wrist Force Sensor for Collaborative Robots

Robot's Six-Degree-of-Freedom Wrist Force Sensor by Microdistortion Testing

Identification Of Robot'S Inertial Parameters Based On 6-Axis Wrist Force Sensor

Design and Calibration of a Joint Torque Sensor for Robot Compliance Control

A Novel Contact-aided Continuum Robotic System: Design, Modeling, and Validation

Dsign of a New Typed Six-Component Wrist Force Sensor of Robot with 3-2-1 Orthogonal Structure

A Structurally Decoupled Mechanism for Measuring Wrist Torque in Three Degrees of Freedom

A Variable-Stiffness Robot for Force-Sensitive Applications

Structural design and performance analysis of elastomer for robot wrist force sensor

Compliant Coordination Control of Two Moving Industrial Robots

Decoupled and isotropic 5-axis force/torque robot sensor

Shape Reconstruction of Extensible Continuum Manipulator Based on Soft Sensors

A Monolithic Cable-Driven Compliant Wrist for Prosthetic Arms