Abstract:In order to respond to the greenhouse effect and achieve sustainable development, microbial-induced carbonate precipitation (MICP) technology based on the spraying method was used as a substitute for Portland cement to reinforce calcareous sand. In order to simulate the tide and determine the suitable concentration, the effects of the initial water level and cementing solution (CS) concentration on the reinforcement were analyzed. The results showed that the distributions of penetration resistance and equivalent calcium carbonate content mainly include two patterns: monotonically decreasing, and initially increasing and then decreasing. The fully saturated case only showed a dense, thin layer of calcium carbonate on the surface, and in the completely dry case, middle cementation was produced. When the initial water level was 0.5 m, the largest range of 60 cm of effective cementation appeared, and both the equivalent calcium carbonate content and penetration resistance were the highest because the microorganisms were more likely to migrate to the particle connection. The calcium carbonate generated by the MICP reaction played a role in increasing the water retention capacity of the sand. As the degree of cementation increased, the SWRC gradually moved up and the matrix suction corresponding to the same volume water content increased sequentially. Increasing the spraying times and the concentration of CS generated more calcium carbonate. The penetration resistance of higher CS concentrations was larger with the same calcium carbonate content. There was a linear relationship between the normalized penetration resistance and the normalized shear wave velocity.

Theory And Application Of Cement-Based Materials Remediation By Carbonate Precipitation (Mcp) Induced By Microorganism

Theory of Microbial Carbonate Precipitation and Its Application in Restoration of Cement‐based Materials Defects

Remediation by carbonate precipitation ( mcp ) induced by microorganism

RESTORATION OF DEFECTS ON THE SURFACE OF CEMENT-BASED MATERIALS BY MICROBIOLOGICALLY PRECIPITATED CaCO3

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

CRACK REPAIR AND SURFACE DEPOSITION OF CEMENT-BASED MATERIALS BY MICP TECHNOLOGY

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

A New Surface-Modified Technology of Cement Mortar Using Calcium Carbonate Biodeposition

In Situ Restoration of the Surface Defects on Cement-Based Materials by Bacteria Mineralization with Spraying Method

Microbial Mineralization at the Surface Layer of Cement-Based Materials and Its Effect on Efflorescence Performance

Study on the Influence Mechanism of Calcium Carbonate Particles on Mechanical Properties of Microcrack Cement

Restoration of Cracks on Surface of Cement-Based Materials by Carbonic Anhydrase Microbiologically Precipitation Calcium Carbonate

Corrosion Protection of Cement-Based Building Materials by Surface Deposition of CaCO3 by Bacillus Pasteurii

Application of microbial biocementation to improve the physico-mechanical properties of cement mortar

A self-healing method for concrete cracks based on microbial-induced carbonate precipitation: bacteria, immobilization, characterization, and application

Influence of Particle Size Distribution on Biocarbonation Method Produced Microbial Restoration Mortar for Conservation of Sandstone Cultural Relics

Biomineralization Process of CaCO3 Precipitation Induced by Bacillus mucilaginous and Its Potential Application in Microbial Self-healing Concrete

Mechanical Properties of Cement Soil Improved Using Microbial-Induced Calcite Precipitation

Micro-macro investigation on bio-cemented sand under different grouting saturation: an effective enhancement method

Enhancement of the yield and strength of microbially-induced carbonate precipitation by optimum cultivation and grouting measures for civil engineering applications

Mechanism of Bacterial Control of Mineralisation Gradient at the Surface Layer of Cement-Based Materials