Abstract:Elastocaloric cooling serves as a promising environmental friendly candidate with substantial energy saving potential as the next generation cooling technology for air-conditioning, refrigeration, and electronic cooling applications. The temperature change (ΔT) of elastocaloric materials is a direct measure of their elastocaloric effect, which scales proportionally with the device cooling performance based on this phenomenon. Here, the underlying physics between the measured ΔT and the adiabatic temperature span ΔTad is revealed by theoretical investigation of the simplified energy equation describing the coupled simultaneous heat transfer and phase transformation processes. The revealed relation of ΔT depends on a simple and symmetric non-linear function, which requires the introduction of an important dimensionless number Φ, defined as the ratio between convective heat transfer energy and variation of internal energy of the material. The theory was supported by more than 100 data points from the open literature for four different material compositions. Based on the theory, a data sampling and reduction technique was proposed to assist future material characterization studies. Instead of approaching ΔTad by applying an ultrafast strain rate in the old way, the proposed prediction of ΔTad is based on the non-linear least squares fitting method with the measured ΔT dataset at different strain rates within the moderate range. Numerical case studies indicated that the uncertainty associated with the proposed method is within ±1 K if the sampled data satisfied two conditions. In addition, the heat transfer coefficient can be estimated as a by-product of the least squares fitting method proposed in this study.

Development Of Elastocaloric Cooling Technology

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

State-of-the-art and Prospects of Elastocaloric Cooling Technology

Numerical Study of a Double-Effect Elastocaloric Cooling System Powered by Low-Grade Heat

A Heat Driven Elastocaloric Cooling System

High-performance multimode elastocaloric cooling system

A Review of Elastocaloric Cooling: Materials, Cycles and System Integrations

Design of a Hydraulically Driven Compressive Elastocaloric Cooling System

Numerical Modeling of an Active Elastocaloric Regenerator Refrigerator with Phase Transformation Kinetics and the Matching Principle for Materials Selection

Energy-Efficient Elastocaloric Cooling by Flexibly and Reversibly Transferring Interface in Magnetic Shape-Memory Alloys

Accurate Prediction of Work and Coefficient of Performance of Elastocaloric Materials with Phase Transformation Kinetics

A compact elastocaloric refrigerator

Elastocaloric Cooling of Shape Memory Alloys: A Review

Towards Practical Elastocaloric Cooling

Additively Manufactured High-Performance Elastocaloric Materials with Long Fatigue Life

Efficient roller-driven elastocaloric refrigerator

A numerical study of elastocaloric regenerators of tubular structures

Highly efficient grooved NiTi tube refrigerants for compressive elastocaloric cooling

A multi-material cascade elastocaloric cooling device for large temperature lift

The Mechanism of ΔT Variation in Coupled Heat Transfer and Phase Transformation for Elastocaloric Materials and Its Application in Materials Characterization

Low-force elastocaloric refrigeration via bending